farmer108

I just put on a set of KOOL-VUE mirrors on my truck and now I need to wire them in . My truck didn't have power mirrors . I found a switch for a 2000 but sofar the only wire harness I can find is for a 1997 . I hope you guys can tell me if this combo will fit . Thanks . Craig

zc4life

Hey Craig,

I have an 02 with power/heated mirrors but, I wanna install the Kool vue power/heated mirrors. would like to know if it is in fact the wireing that needs to be changed. Interested in finding out your salution.

Z

farmer108

Z
If you have power/heated you should be able to just plug them in . My truck didn't have power so I'm trying to cobble up a system with boneyard parts .
I bought mine at partstrain.com , good service and the best price I could find . Good luck
Craig

mopar-or-no-car

Have you looked in the door for the wiring? My truck came with non power tow mirros and i put on the kool-vue's and the wiring was allready in the door.

farmer108

No wiring in the door , I already looked . I'm going to order the harness and take my chances . I'll either be a genius or an idiot . wish me luck
Craig

SIXSLUG

The 97 and earlier didn't have heat IIRC. The 2nd gen wiring harness that comes w/ the koolvues plugs right into the 98 and ups. I have read the 97 and downs need a retro fit. Somebody around these pages makes or knows where to get a conversion plug but its been a while since I saw any banter on that.
Luck

Kurt

farmer108

I lucked out and found wires from a 2001 and got them working . Now I need to hook up the heat , well back to the bone yard for a switch .