Is that metal coolant line behind the motor covered under motor warranty?
#1
Registered User
Thread Starter
Join Date: Aug 2007
Location: Republic of Texas
Posts: 1,629
Likes: 0
Received 0 Likes
on
0 Posts
Is that metal coolant line behind the motor covered under motor warranty?
Seems like it would be a cummins part maybe . Dang thing is leaking from a welded joint it seems. Good thing I caught it leaving the deer lease had to jump someone off and noticed. Got a steady drip.
Radiator was full and the reserve was a tad low. Made it back to Houston ok.
Radiator was full and the reserve was a tad low. Made it back to Houston ok.
#2
Registered User
Talking about the metal line that runs between the block and turbocharger? If so check the short rubber hose by the turbo for leaks. May want to replace the cheap clamps with some good stainless hose clamps.
MikeyB
MikeyB
#3
Registered User
Thread Starter
Join Date: Aug 2007
Location: Republic of Texas
Posts: 1,629
Likes: 0
Received 0 Likes
on
0 Posts
It runs from the right side of the heater core then splits off. I'm pretty sure it's leaking from the split where it is welded and Y's off.
If it's not covered I'm gonna rough it up and put something like JB weld there. Wish I could solder it but it's on the bottom where it's leaking and it looks like an SOB to get off.
If it's not covered I'm gonna rough it up and put something like JB weld there. Wish I could solder it but it's on the bottom where it's leaking and it looks like an SOB to get off.
#4
Registered User
Join Date: Nov 2006
Location: Southern Maryland
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
Take a look at this thread, post number 2, and see if that's your problem.
https://www.dieseltruckresource.com/...e-t249595.html
https://www.dieseltruckresource.com/...e-t249595.html
Trending Topics
#8
Registered User
Join Date: Oct 2006
Location: Cold Lake, Alberta
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
Seems like it would be a cummins part maybe . Dang thing is leaking from a welded joint it seems. Good thing I caught it leaving the deer lease had to jump someone off and noticed. Got a steady drip.
Radiator was full and the reserve was a tad low. Made it back to Houston ok.
Radiator was full and the reserve was a tad low. Made it back to Houston ok.
#9
Registered User
Thread Starter
Join Date: Aug 2007
Location: Republic of Texas
Posts: 1,629
Likes: 0
Received 0 Likes
on
0 Posts
Well I tried to replace that hose last week and have no clue how to get it off so I just tightened the existing clamps and it quit leaking. I put the new hose/clamps in the glovebox.
Thread
Thread Starter
Forum
Replies
Last Post
JIT
24 Valve Engine and Drivetrain
6
01-09-2006 05:59 PM
Tommy93w350
24 Valve Engine and Drivetrain
6
06-20-2005 04:51 PM
Bowman
3rd Gen Engine and Drivetrain -> 2003-2007
9
03-19-2005 01:07 PM
030303
3rd Gen High Performance and Accessories (5.9L Only)
5
12-01-2004 06:58 PM
chrismez
3rd Gen Engine and Drivetrain -> 2003-2007
4
11-08-2004 06:38 AM