Melted Pistons
#1
Registered User
Thread Starter
Join Date: Jan 2007
Location: Alberta
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Melted Pistons
Hello
I am just posting this to try and confirm something that I have heard recently. I have been told that the 03-07 Dodges are having problems with melting pistons when chips and performance injectors are added.
Any input would be appreciated.
Thanks
I am just posting this to try and confirm something that I have heard recently. I have been told that the 03-07 Dodges are having problems with melting pistons when chips and performance injectors are added.
Any input would be appreciated.
Thanks
#2
Haha i think the 'problem' comes from guys who get the chips put it on the extreme setting and then stay on the go pedal for to long and repeatedly which in some cases will overfuel and raise egt's throug the roof and then melt pistons
#4
Registered User
It's folks with highly modified trucks, Twins, dual CP3's, big sticks, stacked programmer/pressure box and the list goes on. It's not everyone though. Just a few folks who have made oops's. One bad injector at this level and running it very hard may cause damage. Sled pulling, etc.
Thread
Thread Starter
Forum
Replies
Last Post
blownsmoke2
3rd Gen High Performance and Accessories (5.9L Only)
52
05-24-2007 10:25 PM
ddestruel
Performance and Accessories 2nd gen only
7
05-10-2005 12:17 AM