04DEEZELRAM

Well i got my hands on some injectors from a marine common rail with a engine horespower rating of 380, i wounder if they will work in my truck, i just worried about the spray patterns being differant and hurting my truck, and is there anywhere i might be able to send them to get tested.

cbrahs

i would call Don M. he will shoot you straight.

04DEEZELRAM

Would you know his number by any chance?

04DEEZELRAM

anyone bump....

RyeThomas

Youll have a hard time calling Don direct so go here and contact one of his vendors. http://www.f1diesel.com/contacts.html

04DEEZELRAM

Thanks.........

revolution_dsl

marine injectors can handle mucho pressure

04DEEZELRAM

im just worried about the spray pattern being differant

gus's 03

pm sent.......

QSK60

I was looking into the same thing. I was trying to find the injector part numbers for a QSB5.9-480 HO/GS. That is the top of the factory 5.9 food chain with 480 hp. I found the CPL which is 1860 but our parts department can't find the injector part number with the CPL for some reason. I need to find an Engine Serial Number for either a QSB5.9-480 or a QSB5.9-440.

So if anyone knows someone knows anyone with a boat with a pair of these monsters in it, get the Engine Serial Number and PM me.

I wouldn't mind getting a head, cam, and pistons either. The piston skirts are teflon coated.

04DEEZELRAM

I can probally get you an engine serial number, ill make a call to the someone i know at the factory

revolution_dsl

im meeting up with someone today that will have the answers as to spray pattern. 04deezel, how custom are you going with injectors? I'm thinking youre going to need more CP3.

04DEEZELRAM

i think im just going to run the marine injectors if i can, i was going to have them sent off and gone through and modified for more flow, but im going to wait on that.

revolution_dsl

how many hole injector are they?
you have a 555 engine?

04DEEZELRAM

I counted 7 holes, and yes i do have a 555 engine