Making my own tracton bars?
#1
Registered User
Thread Starter
Join Date: Oct 2006
Location: SoCal
Posts: 1,998
Likes: 0
Received 0 Likes
on
0 Posts
Making my own tracton bars?
Hello. I have a friend who is a great welder/fabricator. I have access to huge Heim joints. Who has done this and does anyone have any good tech. info. for doing this?
Thanx.
Thanx.
#4
Registered User
bobby1stack
I am assuming your brackets on the back are wellded to the bottom of the shock mount. If not please confirm attachment if you do not ming sharing. if not i understand. Also if you don't mind sharing how are the front brackets mounted. The manual on my 03 says no drilling or welding but that is also from DC and i only bought the truck b/c of the cummins.
Thanks
I am assuming your brackets on the back are wellded to the bottom of the shock mount. If not please confirm attachment if you do not ming sharing. if not i understand. Also if you don't mind sharing how are the front brackets mounted. The manual on my 03 says no drilling or welding but that is also from DC and i only bought the truck b/c of the cummins.
Thanks
#5
Registered User
Join Date: Dec 2003
Location: Boise, Idaho
Posts: 5,540
Likes: 0
Received 0 Likes
on
0 Posts
jmccart...
I have fabbed up A BUNCH OF PAIRS.
Call me with any questions. There are lots of acceptable tubes/pipes and they do not HAVE to be DOM.
505-379-2750 Christian
I have fabbed up A BUNCH OF PAIRS.
Call me with any questions. There are lots of acceptable tubes/pipes and they do not HAVE to be DOM.
505-379-2750 Christian
Thread
Thread Starter
Forum
Replies
Last Post