LP location
04-09-2007, 07:05 PM
#1
Registered User
Thread Starter
Join Date: Feb 2004
Location: Oklahoma
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
LP location
Have been kicking a round putting new lp on my 98.
got to lookin at truck found what looks like elec. lp mounted on block in about same local as a lp on a 12v.
Is this it Or is it in tank??
got to lookin at truck found what looks like elec. lp mounted on block in about same local as a lp on a 12v. Is this it Or is it in tank??
04-09-2007, 07:09 PM
#2
Chapter President
So we are assuming that you have a 98.5 24v?
If so the LP is to the right below the Fuel filter.
Vulcan has a nice Big line kit with relocation for the LP. Check into it, it's nice
If so the LP is to the right below the Fuel filter.
Vulcan has a nice Big line kit with relocation for the LP. Check into it, it's nice
04-09-2007, 08:12 PM
#4
Registered User
Join Date: Apr 2007
Location: central georgia
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
I also have 98.5 24v and the lift pump is directly beneath and slightly behind the fuel filter. Just follow the dipstick tube toward the firewall and it will go slightly beyond the LP.
04-09-2007, 09:51 PM
#5
Registered User
Join Date: Mar 2007
Location: Fort Worth, Texas
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
Yes, the 24V electric lift pump is mounted on a bracket which covers the same hole in the block where the 12V manual pump mounts. When you replace it, take it off that bracket and mount it back on the frame rail in front of your fuel tank. (You'll need a Vulcan kit from Geno's Garage) Leave the old bracket on the block though.. It covers the hole.
Thread
Thread Starter
Forum
Replies
Last Post