How to lower Dodge 2500 rear end
#1
Registered User
Thread Starter
Join Date: Aug 2007
Location: edmonton alberta canada
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
How to lower Dodge 2500 rear end
If anyone can help me find a U bolt plate for lowering the rear end for my 5th wheel trailer. the current u bolt plate is about 6 inches high, does anyone know where to get a lower one.
Thanks
BDF
Thanks
BDF
#2
Registered User
Welcome to DTR. Go to the "User CP" link and fill in your signature so we know what you have besides "Dodge 2500".
Someone here put a great photo "How to..." together for removing the spacer on top of the spring pack on 3rd Gen 25/3500s. Pretty good, lowers about 1 1/2" or 2. Do a search, you should be able to find it.
Have you already raised your hitch in the bed or lowered the pin on the 5th? Another option is to flip your axle on the 5th if it hasn't already been done.
Someone here put a great photo "How to..." together for removing the spacer on top of the spring pack on 3rd Gen 25/3500s. Pretty good, lowers about 1 1/2" or 2. Do a search, you should be able to find it.
Have you already raised your hitch in the bed or lowered the pin on the 5th? Another option is to flip your axle on the 5th if it hasn't already been done.
#3
Registered User
Join Date: May 2010
Location: Mountain Home ID
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
wait lowering the truck will raise the back end of your 5th wheel, my Dodge 2500 was to high, i flipped the axles on my 5th wheel, and then had to lower my hitch in my bed. worked out good enough.
Thread
Thread Starter
Forum
Replies
Last Post
rock crawler
3rd Generation Ram - Non Drivetrain - All Years
7
06-06-2008 10:54 PM
doorguy
3rd Gen Engine and Drivetrain -> 2003-2007
3
06-08-2007 06:19 AM
royta
1st Gen. Ram - All Topics
8
07-13-2004 06:54 PM