2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

Looking for Steering Box Rebuild Kit

Thread Tools
 
Search this Thread
 
Old 11-28-2008, 12:17 PM
  #1  
Registered User
Thread Starter
 
bill moore's Avatar
 
Join Date: Apr 2006
Location: waubaushene
Posts: 112
Likes: 0
Received 0 Likes on 0 Posts
Looking for Steering Box Rebuild Kit

As the title states, I need a kit that comes with the ball screw, bearings and seals.
Old 11-28-2008, 01:47 PM
  #2  
Registered User
 
thumper549's Avatar
 
Join Date: Jul 2008
Posts: 391
Likes: 0
Received 0 Likes on 0 Posts
Imo you will be better off to buy the bigger box up grade then mess with the little one
Old 11-28-2008, 04:43 PM
  #3  
Registered User
 
gizzi's Avatar
 
Join Date: Jan 2007
Location: south east Pa.
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
Thumper when you say bigger box what are you talking about? a 3rd gen box??
Old 11-28-2008, 04:57 PM
  #4  
Registered User
 
dozer12216's Avatar
 
Join Date: Dec 2007
Location: North Carolina or Kentucky. Take your pick
Posts: 2,738
Received 0 Likes on 0 Posts
Replace the gear assy. Don't rebuild for the cost of kit vs replace of assy, especially if more than leak or adjustment. JMHO
Old 11-28-2008, 11:48 PM
  #5  
Registered User
 
thumper549's Avatar
 
Join Date: Jul 2008
Posts: 391
Likes: 0
Received 0 Likes on 0 Posts
No, it is called DDs or something like that, comes with a bottom bearing that fit a steel bar that stradels the frame up front, Offers lot more support.
Old 11-29-2008, 10:02 AM
  #6  
Registered User
 
infidel's Avatar
 
Join Date: Dec 2003
Location: Montana
Posts: 14,672
Likes: 0
Received 9 Likes on 9 Posts
No, it is called DDs or something like that
You mean a DSS, best thing you can do to save the life of your steering box, keeps the frame from cracking too.
Check it out here http://www.solidsteel.biz/
Old 11-29-2008, 11:14 AM
  #7  
Registered User
 
thumper549's Avatar
 
Join Date: Jul 2008
Posts: 391
Likes: 0
Received 0 Likes on 0 Posts
Thanks Infidel,
I have one in my Trk. Happy with it, Too dang cold to go out and crawl under last night to get it right (name ).
The main pt the stock box and most of the steering in your (our ) Dodge is crapola. Replace with a BBD (bigger better deal LOL )
Old 12-10-2008, 12:40 PM
  #8  
Registered User
Thread Starter
 
bill moore's Avatar
 
Join Date: Apr 2006
Location: waubaushene
Posts: 112
Likes: 0
Received 0 Likes on 0 Posts
i realize i have to get a dss but want to avoid paying $500 for a steering box that i can rebuild myself. No point of getting a dss til this box is fixed.
Old 12-10-2008, 07:21 PM
  #9  
Registered User
 
J.Suplanski's Avatar
 
Join Date: Jan 2008
Posts: 449
Likes: 0
Received 0 Likes on 0 Posts
Talking Dss

DSS is the only way to go, sure did the trick for me!
Old 12-10-2008, 08:35 PM
  #10  
Registered User
 
thumper549's Avatar
 
Join Date: Jul 2008
Posts: 391
Likes: 0
Received 0 Likes on 0 Posts
the stock box will not help as it does not have the bottom bearing
Old 12-10-2008, 09:08 PM
  #11  
Registered User
 
CMooreBLKSMK's Avatar
 
Join Date: Sep 2007
Location: Raeford, NC
Posts: 248
Likes: 0
Received 0 Likes on 0 Posts
The DSS is made to fit the stock box, it is not a box, just a support. I have never heard of a "bigger" box. What bigger box are you talking about? If the DSS will fit it it may be something of interest to me because I have the DSS.

I hear of lots of people going with a 3 turn box from NAPA. It seems after market
box's are getting hard to find though.
Thanks
Cory
Old 12-10-2008, 11:30 PM
  #12  
Registered User
 
thumper549's Avatar
 
Join Date: Jul 2008
Posts: 391
Likes: 0
Received 0 Likes on 0 Posts
Well..it is real dark here in down town Juneau..But I have a steer box in that the shaft comes out the bottom and a bearing is located there that attaches to the cross Piece...which attaches to both sides of the frame rails
Old 12-11-2008, 02:00 AM
  #13  
Registered User
 
pind's Avatar
 
Join Date: Jul 2004
Location: Whitehorse, cultural hub of the universe..
Posts: 1,187
Received 20 Likes on 19 Posts
then you have a DSS on there thumper.

Hows the dark treating you?

only another 10 days, and we start gaining again. Gotta love that
Old 12-11-2008, 02:10 AM
  #14  
Registered User
 
98whitelightnin's Avatar
 
Join Date: Jun 2008
Location: Wesley Chapel FL
Posts: 843
Likes: 0
Received 3 Likes on 2 Posts
I got a rebuilt one from Oreilly auto parts for under $200.
Old 12-11-2008, 09:19 AM
  #15  
Registered User
 
bob95065's Avatar
 
Join Date: Apr 2007
Location: Santa Cruz, CA
Posts: 304
Likes: 0
Received 1 Like on 1 Post
I got my rebuild parts here: http://www.straightlinesteering.com/ They are local for me and seel quality, American made parts.


Quick Reply: Looking for Steering Box Rebuild Kit



All times are GMT -5. The time now is 06:05 PM.