ddszero

OK I'm looking for a gauge set for my truck. All the ones I find have a Trans temp gauge in them and I have the 6sp do I really need the Trans temp gauge ? I am looking at a 1600 pryo and a 45lb boost gauge maybe from Auto Meter. What other gauges would be helpful? I am planning to use a dash pod mount instead of a pillar mount.

I am also planning to install a Quadzilla Rail Pressure Gauge for my fuel system.

Would it be better to invest in the Edge Attitude with out the Edge Juice installed? The Edge Insight is only for the 2006 and up. Is it even possible to use the Edge Attitude like the Insight? Or will the mechanical gauges be the best bet?

Any and all ideas and comments are welcome.

Thanks.
__________________________________________________ _____________________
2005 2500 Crew Cab short bed 4x4 with a NV5600 3.73 With Limited Slip
111,000 Miles, K&N Drop in filter
12K Mile Marker Front Mounted winch
BFG KO AT 285/70 R15
LEER Camper Shell (my puppies BIG Kennel)

1985cucv

60 psi boost gauge there is a bunch with fuel pressure boost and egt you just have to look around i think diesel manor sells them the dtr store might even sell them

got_soot

60psi boost guage and go with a mechanical guage like a autometer setup or isspro.. also use the the fuel pressure inplace of the tranny temp.

ddszero

What would be a better for a pryo 1600 or 2000?

WhiteMule

I would go with a 1600*. You need to be shutting it down before you reach that temp anyway.

got_soot

I 100% agree with that

ddszero

I am looking around to buy my gauges and I am finding a Pre and Post turbo for the Pryo gauges. Which one should I be using?

Will using a Boost Gauge Fitting "Boost Bolt" give me the correct boost reading?

Thanks.
__________________________________________________ ___________________________
2005 2500 Crew Cab short bed 4x4 with a NV5600 3.73 With Limited Slip
111,000 Miles, K&N Drop in filter
12K Mile Marker Front Mounted winch
BFG KO AT 285/70 R15
LEER Camper Shell (my puppies BIG Kennel)