Looking for feed back on "LUKES LINK"
#1
Registered User
Thread Starter
Join Date: Apr 2007
Location: Edmonton Alberta
Posts: 2,435
Likes: 0
Received 0 Likes
on
0 Posts
Looking for feed back on "LUKES LINK"
As the title states, I'm looking for feed back both good and bad on Lukes links.
I've read all the posts on 3rd gen Mods, so I'm well versed in that, so for now I'm just interested in this repair thanks.
Nick
(I posted this on the Cummins forum as well)
I've read all the posts on 3rd gen Mods, so I'm well versed in that, so for now I'm just interested in this repair thanks.
Nick
(I posted this on the Cummins forum as well)
#3
Registered User
I have a lifetime warrantied trackbar on my own truck, bought it way before Luke's was around but have installed several.
No complaints. Only one has come back to be retightened.
Local diesel shop says they won't touch Luke's due to liability issues.
No complaints. Only one has come back to be retightened.
Local diesel shop says they won't touch Luke's due to liability issues.
#6
Registered User
I put it on a cheap track bar and the rubber bushing went on the axle end. I thought that it was because I had the Luke's Link end tight. I then installed it on the OEM track bar several months ago. Alignment shop tightened it up like I had it on the first bar. No problems to date.
Trending Topics
#11
Registered User
Join Date: Feb 2006
Location: SW Michigan/New Mexico
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Have two 2nd gens with Luke's tie rod/track bar ends on them. have over 70K miles on one and no problems. Only complaint is the one hits the front diff cover. ( I need a leveling kit.) Great customer service as well!
#14
Registered User
Join Date: Mar 2005
Location: Nevada
Posts: 2,615
Likes: 0
Received 0 Likes
on
0 Posts
I've got one on my trackbar right now. It fixed it. Unless you're offroading I think it works great. Only downside is that it takes more time to install the Luke's link than installing the trackbar. That end bushing doesn't want to come out either. I put it between a bottle jack and the frame of my truck and it started jacking up my truck before the bushing came out. Finally I jerked it a few times and it blew out.