24 Valve Engine and Drivetrain Discuss the 24 Valve engine and drivetrain here. No non-drivetrain discussions please. NO HIGH PERFORMANCE DISCUSSION!

lift pump on the way out

Thread Tools
 
Search this Thread
 
Old 09-18-2005, 03:46 PM
  #1  
Registered User
Thread Starter
 
evan3000's Avatar
 
Join Date: Aug 2005
Location: Alberta, Canada
Posts: 56
Received 0 Likes on 0 Posts
lift pump on the way out

My lift pump started giving me problems yesterday, the pressure would bounce all over the place (5-14psi during idle). I seen it get down to about 3 psi a couple of times while limping her home. Do you think I did any harm to my IP? How long is the IP and LP covered under warranty, My truck only has 40000 km on it.
Old 09-18-2005, 05:22 PM
  #2  
Administrator
 
phox_mulder's Avatar
 
Join Date: May 2002
Location: Sandy, Utah
Posts: 6,522
Likes: 0
Received 1 Like on 1 Post
They are both covered for 5 years/100,000 miles, whichever comes first.

You might want to just get your own lift pump though, Dodge is now using the 3rd gen in-tank pump to replace them,
and those that have had the retrofit aren't happy with it at all.


phox
Old 09-18-2005, 09:21 PM
  #3  
Registered User
 
Vulcan's Avatar
 
Join Date: Dec 2004
Location: Vancouver, USA
Posts: 138
Likes: 0
Received 0 Likes on 0 Posts
Once you verify you gauge and filter are OK, you need to get a new LP. Check Cummins or Napa.
Old 09-18-2005, 10:28 PM
  #4  
Registered User
 
AAmeeting's Avatar
 
Join Date: Mar 2005
Location: INDIANA
Posts: 504
Likes: 0
Received 0 Likes on 0 Posts
WWW.DIESELPP.COM It will work great! I promise.
Old 09-19-2005, 08:43 PM
  #5  
Registered User
Thread Starter
 
evan3000's Avatar
 
Join Date: Aug 2005
Location: Alberta, Canada
Posts: 56
Received 0 Likes on 0 Posts
I found out today that a replacement LP from the dealer is $480.00.
and a jobber pump was about the same. I was shocked, has anybody else in alberta purchesed one recently.
Old 09-19-2005, 09:18 PM
  #6  
Registered User
 
claymx's Avatar
 
Join Date: Dec 2004
Location: Red Deer, Alberta
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
I just had LP replaced about week and half ago. Northwest Motors said if they had to replace LP they only do the retrofit in the tank now. seems to be ok but not too impressed with the pressures. but seem to have more power now??? don't now how. just runs better. was that price for the retrofit or stock replacement? cuz thats about right for stock replacement at Northwest.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Txwelder
HELP!
13
12-18-2023 02:35 PM
NickBeek
3rd Gen Engine and Drivetrain -> 2003-2007
3
07-12-2012 08:19 PM
CHIp07
3rd Gen High Performance and Accessories (5.9L Only)
18
04-09-2008 08:22 PM
Txwelder
12 Valve Engine and Drivetrain
2
05-19-2005 06:10 PM



Quick Reply: lift pump on the way out



All times are GMT -5. The time now is 12:09 PM.