Lift Pump?
#3
Registered User
Join Date: Jan 2008
Location: Houston
Posts: 1,719
Likes: 0
Received 0 Likes
on
0 Posts
I am going to be replacing my LP with a Raptor once it is time. They do not require the fuel return line, and are rated for 16,000 hours of use. They are cheaper than the Airdog and allow you to run 1/2 fuel lines (supplied).
#5
Ok so I should be good if I use the raptor 100 and run it to stock canister and drop a baldwin filter it canister. Will everything be supplied with the raptor to install it?
#6
Registered User
Join Date: Jan 2008
Location: Houston
Posts: 1,719
Likes: 0
Received 0 Likes
on
0 Posts
You will need to buy a Liberty canister for your in tank. They are about 100 bucks. Other then that everything you need is there.
I have heard of guys modding the stocker but I have not been able to find any info on what exactly needs to be done to it to make it work. The Liberty also helps get the draw straw deeper into the tank. Some people notice issues with picking up fuel when lower then 1/4 tank on steep grades. The Liberty can with the supplied draw straw with the Raptor from GDP fixes this.
http://www.glacierdieselpower.com/pr..._id=RP-100-D05
http://www.glacierdieselpower.com/pr...f_id=0511-FTSM
I have heard of guys modding the stocker but I have not been able to find any info on what exactly needs to be done to it to make it work. The Liberty also helps get the draw straw deeper into the tank. Some people notice issues with picking up fuel when lower then 1/4 tank on steep grades. The Liberty can with the supplied draw straw with the Raptor from GDP fixes this.
http://www.glacierdieselpower.com/pr..._id=RP-100-D05
http://www.glacierdieselpower.com/pr...f_id=0511-FTSM
Trending Topics
#8
You will need to buy a Liberty canister for your in tank. They are about 100 bucks. Other then that everything you need is there.
I have heard of guys modding the stocker but I have not been able to find any info on what exactly needs to be done to it to make it work. The Liberty also helps get the draw straw deeper into the tank. Some people notice issues with picking up fuel when lower then 1/4 tank on steep grades. The Liberty can with the supplied draw straw with the Raptor from GDP fixes this.
http://www.glacierdieselpower.com/pr..._id=RP-100-D05
http://www.glacierdieselpower.com/pr...f_id=0511-FTSM
I have heard of guys modding the stocker but I have not been able to find any info on what exactly needs to be done to it to make it work. The Liberty also helps get the draw straw deeper into the tank. Some people notice issues with picking up fuel when lower then 1/4 tank on steep grades. The Liberty can with the supplied draw straw with the Raptor from GDP fixes this.
http://www.glacierdieselpower.com/pr..._id=RP-100-D05
http://www.glacierdieselpower.com/pr...f_id=0511-FTSM
#9
Registered User
Join Date: Jan 2008
Location: Houston
Posts: 1,719
Likes: 0
Received 0 Likes
on
0 Posts
Call Richard at GDP and make sure there is no other little things you would need. I haven't dealt with an 03 so there might be something else that I don't know about.
509-993-4923
509-993-4923
Thread
Thread Starter
Forum
Replies
Last Post
Yukon Dodge
24 Valve Engine and Drivetrain
18
07-01-2004 10:08 AM
Puke
24 Valve Engine and Drivetrain
7
05-22-2003 12:18 AM
Haulin_in_Dixie
24 Valve Engine and Drivetrain
47
11-17-2002 09:30 PM