Leveling Kit Advise Please 2"
#1
Leveling Kit Advise Please 2"
MY truck currently has about a 2-3" lift all the way around it, I want to level it out in the front, I measured and the front sits just about 2" lower than the back, I am wondering about the 2" spacers from Hell Bent Steel, if they are good, I dug up an old thread and someone said it lifted the nose up too high, I dont want that, if the 2" will be too high and be more like 2.5", I might get a kit from someone else at 1.5", but the $65 price on the hellbent ones looks nice... dont have a ton to spend and dont want to do mods in the rear to bring it up if the nose will sit too high. Let me know thanks
#2
Registered User
Join Date: Feb 2004
Location: Surrey BC Canada (it's not that bad eh!)
Posts: 3,640
Likes: 0
Received 0 Likes
on
0 Posts
You don't say, what kinda lift you have now?
Why not just remove whatever you did to the rear to lift it, make it level that way?
Why not just remove whatever you did to the rear to lift it, make it level that way?
#3
Registered User
http://www.topguncustomz.com/Store/products.php?S_ID=57
They make a 1in, 1.5in and 2in.
They make a 1in, 1.5in and 2in.
#5
Registered User
Join Date: Feb 2004
Location: Surrey BC Canada (it's not that bad eh!)
Posts: 3,640
Likes: 0
Received 0 Likes
on
0 Posts
I don't think you want to go much more than 2 or 3 inches in the front or you'll end up having to change control arms, pitman arm and probly a bucha other stuff...
Is there a block under the rear springs? If so maybe remove it?
Is there a block under the rear springs? If so maybe remove it?
Thread
Thread Starter
Forum
Replies
Last Post
soilsample
3rd Generation Ram - Non Drivetrain - All Years
11
08-19-2010 11:55 PM
PEAKSTRYDE
Suggestions, Comments and Site Questions
1
10-11-2007 04:20 PM
06Cummins
3rd Gen High Performance and Accessories (5.9L Only)
18
11-21-2006 04:56 PM
MAJORCOMMOTION
3rd Gen High Performance and Accessories (5.9L Only)
10
10-15-2004 01:38 AM
kry226
3rd Generation Ram - Non Drivetrain - All Years
3
07-26-2004 10:37 AM