the496rocket

MY truck currently has about a 2-3" lift all the way around it, I want to level it out in the front, I measured and the front sits just about 2" lower than the back, I am wondering about the 2" spacers from Hell Bent Steel, if they are good, I dug up an old thread and someone said it lifted the nose up too high, I dont want that, if the 2" will be too high and be more like 2.5", I might get a kit from someone else at 1.5", but the $65 price on the hellbent ones looks nice... dont have a ton to spend and dont want to do mods in the rear to bring it up if the nose will sit too high. Let me know thanks

Fisherguy

You don't say, what kinda lift you have now?
Why not just remove whatever you did to the rear to lift it, make it level that way?

98whitelightnin

http://www.topguncustomz.com/Store/products.php?S_ID=57
They make a 1in, 1.5in and 2in.

the496rocket

Oh im sorry, this should have been in the 2nd gen forums. I dont know what lift it has currently, i bought it with it on.

Fisherguy

I don't think you want to go much more than 2 or 3 inches in the front or you'll end up having to change control arms, pitman arm and probly a bucha other stuff...

Is there a block under the rear springs? If so maybe remove it?