Less back pressure 12wg, 14 or 16
02-25-2007, 06:00 PM
#1
Registered User
Thread Starter
Join Date: Jun 2006
Location: Republic of Alberta
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Less back pressure 12wg, 14 or 16
Which one of these would provide the most flow/least back pressure on a stage 4 HTT upgaded turbo? ... I am guessing the 16?
Would a 12wg out flow a 14 non wg?
Also will the 14 or 16 keep the boost pressure below 35 psi on the stage 4 while on a 12valve in say the 320 - 350hp range?
I have the stage 4 compressor housing and wheel and sitting in the box. When I go to put it on I was thinking about putting a larger exaust housing on as well. Obvously the 14wg would be the best but it cost 500 cnd$ and I realy don't feel like spending that much on my old junker just for a small gain in spool or top end over the cheaper housing.
Would a 12wg out flow a 14 non wg?
Also will the 14 or 16 keep the boost pressure below 35 psi on the stage 4 while on a 12valve in say the 320 - 350hp range?
I have the stage 4 compressor housing and wheel and sitting in the box. When I go to put it on I was thinking about putting a larger exaust housing on as well. Obvously the 14wg would be the best but it cost 500 cnd$ and I realy don't feel like spending that much on my old junker just for a small gain in spool or top end over the cheaper housing.
Thread
Thread Starter
Forum
Replies
Last Post
dzl_damon
1st Gen. Ram - All Topics
37
04-22-2010 10:48 PM
10fords
24 Valve Engine and Drivetrain
35
04-12-2009 11:31 AM
jmccart
3rd Gen High Performance and Accessories (5.9L Only)
4
07-17-2008 10:05 AM
JoshPeters
General Diesel Discussion
17
04-03-2005 08:13 AM