PDA

View Full Version : KYDTR #41 Discussion Thread


Pages : [1] 2

haloman
05-20-2007, 01:18 PM
Thanks to everyone that came out last night. It was a blast. I think everyone who came down had a good time. Apoligies to Jim since noone was there who was older or who uses their truck to tow much of anything. [laugh]

But here is the footage from the 1st meet-

Josh's Peel Out-
http://www.youtube.com/watch?v=xPjJD3P1qD0

Cory's Attempts-
http://www.youtube.com/watch?v=IL81KdabfSA
http://www.youtube.com/watch?v=swN6vF-Vjno

Pics-
http://i60.photobucket.com/albums/h37/slayerdan457/IMG_0901.jpg
http://i60.photobucket.com/albums/h37/slayerdan457/IMG_0902.jpg
http://i60.photobucket.com/albums/h37/slayerdan457/IMG_0903.jpg
http://i60.photobucket.com/albums/h37/slayerdan457/IMG_0904.jpg

haloman
05-20-2007, 01:19 PM
So now lets discuss when we want to meet again as a group....

rynemurch
05-20-2007, 05:34 PM
We need to find some where that has a dyno and is near by! That would be alot of fun and we can check out each others truck. I also think that would get more people to join. We also could get more pic and videos!:cool:

rynemurch
05-20-2007, 11:26 PM
Josh
Did u get your air fixed?

Truck sounds good on video![roll]

O791challenger
05-21-2007, 02:49 AM
I got it all back together, now I just have to pull a vaccum on it to see if I have any leaks. Then it gets charged, and I will have air all the time.

Don't sound bad for a old inline 6!

O791challenger
05-21-2007, 02:53 AM
So now lets discuss when we want to meet again as a group....

Somewhere wet so Cory can do burnouts. Just joking!!

We should have one where we could have a little room to breath. We weren't there 30 mins and the law was on us.

FarmerJim
05-21-2007, 08:01 AM
Boy I guess we left just in time. Im to old to go to the poky. Really appreciate the freindly attitude toward an old fogy that only tows with his truck. Great pics and video Daniel.

haloman
05-21-2007, 09:58 AM
Somewhere wet so Cory can do burnouts. Just joking!!

We should have one where we could have a little room to breath. We weren't there 30 mins and the law was on us.

I really think the law was just making their rounds, They drive by work 2-3 times a day so we werent causing a rukus. And Cory told me all about the black marks he left at the Car Wash.:rolleyes:

Boy I guess we left just in time. Im to old to go to the poky. Really appreciate the freindly attitude toward an old fogy that only tows with his truck. Great pics and video Daniel.

Thanks for coming down Jim and you are welcome at any of our events.

haloman
05-21-2007, 10:00 AM
We need to find some where that has a dyno and is near by! That would be alot of fun and we can check out each others truck. I also think that would get more people to join. We also could get more pic and videos!:cool:

I dont know where there is a dyno at local, I'll make some calls and see what I can rustle up.

haloman
05-21-2007, 02:30 PM
If we want to do a dyno day I need to know if anyone knows where there is a Dyno? Cummins Cumberland in E-Ville has one but the Service Manager Guy had NO intrest in doing in it so I am going to call some more people.

rynemurch
05-21-2007, 02:48 PM
I dont know where there is a dyno at local, I'll make some calls and see what I can rustle up.

I will see what I can come up with!

m batterson
05-21-2007, 08:19 PM
hi all,
there is an outside chance the DPM Dyno will be at Diesel Mania, which has been rescheduled from early May to the first weekend in July.it will be at the lincoln county fairgrounds in Stanford.

i will keep everyone informed.

thanks,
mike

O791challenger
05-21-2007, 08:51 PM
Dan,
I know slingblade performance in anna Il has a dyno. But the is a couple of places in E-ville that have dynos. One is a tuner shop so they might not be interested in us smokin up their shop. The other is somewhere over by 1st ave. I will have to gat ahold of the guys from the "ace of clubs" mopar club and find out exactly where it is.

haloman
05-21-2007, 10:30 PM
Dan,
I know slingblade performance in anna Il has a dyno. But the is a couple of places in E-ville that have dynos. One is a tuner shop so they might not be interested in us smokin up their shop. The other is somewhere over by 1st ave. I will have to gat ahold of the guys from the "ace of clubs" mopar club and find out exactly where it is.

Ya I remeber you telling me about the place in AnnaI think that might be way too far for some of our East Ky guys to come. But let me know about the places in E-ville, it cant hurt to ask them. Since the guy at Cummins Cumberland was very mean.[director]

rynemurch
05-23-2007, 04:09 PM
hi all,
there is an outside chance the DPM Dyno will be at Diesel Mania, which has been rescheduled from early May to the first weekend in July.it will be at the lincoln county fairgrounds in Stanford.

i will keep everyone informed.

thanks,
mike

How far is Stanford or what is it close by just wondering?

RYNE

I got a few guys at work that live by hoilday world and they are going to see if there are any dyno up that way!

haloman
05-23-2007, 04:11 PM
How far is Stanford or what is it close by just wondering?

RYNE

I got a few guys at work that live by hoilday world and they are going to see if there are any dyno up that way!

Stanford is 200 miles away from us below Lexington.

Butzdiesel
05-24-2007, 07:08 PM
Dan,

Total Performance in evansville has a dyno, they let me put my truck on it about a year ago. Not sure if they still do that anymore but most likely they do.

O791challenger
05-24-2007, 07:38 PM
Dan,

Total Performance in evansville has a dyno, they let me put my truck on it about a year ago. Not sure if they still do that anymore but most likely they do.

Thats the one I have been trying to think of. I keep thinking it was forgein performance, but I knew that wasn't right.

haloman
05-25-2007, 02:00 PM
Dan,

Total Performance in evansville has a dyno, they let me put my truck on it about a year ago. Not sure if they still do that anymore but most likely they do.

Thanks, I'll give them a call.

You know you guys can add in your sigs that your official memebers if you filled out a form for me.

rynemurch
05-25-2007, 02:16 PM
DAN
I need some forms cause I have ran into some people with diesels and I tell them about our chapter and they would like to join.[guitar]

haloman
05-25-2007, 02:38 PM
Thanks Ryne I think that it is big enough in your sig. :o

PM your Email address and I will email you the memebership form, then just get the forms back to me.

O791challenger
05-25-2007, 02:58 PM
Dan,
Super bike shop in E-ville has a dyno also. If you call them talk to Gary he is the owner!

rynemurch
05-25-2007, 04:03 PM
Josh

Im going to wash and wax my truck if you want to come and help tomorrow! We could do yours if you dont go to the lake.

Dan

Is that better with the sig.[laugh]

haloman
05-25-2007, 04:23 PM
Dan,
Super bike shop in E-ville has a dyno also. If you call them talk to Gary he is the owner!

Ok i will try monday for those places as its been busy here at work.

Dan

Is that better with the sig.[laugh]

Ya I was just giving a hard time. [laugh]

O791challenger
05-25-2007, 06:06 PM
Josh

Im going to wash and wax my truck if you want to come and help tomorrow! We could do yours if you dont go to the lake.

Dan

Is that better with the sig.[laugh]

I am leaving for the lake in the morning, you need to load your slowcon up and come down there and ride then we can go eat at willow pond!

haloman
05-25-2007, 06:24 PM
You guys should try the Front Porch in Marion. I assume you go thourgh Marion and Sturgis and not the long way down the Pennyrile.

O791challenger
05-25-2007, 07:07 PM
The parkway is faster to my house. Its on barkley about a mile up river from Paris Tn.

haloman
05-26-2007, 09:06 AM
The parkway is faster to my house. Its on barkley about a mile up river from Paris Tn.

I see, we tryed eating at the Willow Pond once but it wasnt very tasty at all. Now there is a Steakhouse down at the Intersection of the Interstate and the road from Eddyville that it is really good. I dunno if it is still there or not. It used to be called Santa Fe or something.

rynemurch
05-26-2007, 08:27 PM
DAN

I cant get the desk top to work so if I could meet you somewhere so I can get 1 form then I would make copies.

haloman
05-27-2007, 12:43 PM
DAN

I cant get the desk top to work so if I could meet you somewhere so I can get 1 form then I would make copies.

PM sent......

O791challenger
05-29-2007, 01:03 AM
I see, we tryed eating at the Willow Pond once but it wasnt very tasty at all. Now there is a Steakhouse down at the Intersection of the Interstate and the road from Eddyville that it is really good. I dunno if it is still there or not. It used to be called Santa Fe or something.

Theres the prob, you need to eat at the one in aurora. The one in Eddyville is no where near as good as the original in aurora!

haloman
05-31-2007, 11:21 AM
Is total perfomance still open? I tryed calling them from the numbers I googled and one was disconnected and the other was some random guy.

Gary at the Super Bike Shop had the day off but I talked to the Marty and he is gong to talk to him and see if we can get something together. So how many ppl would be intrested in actually Dynoing. I think we would need 15-20 trucks.

O791challenger
05-31-2007, 04:11 PM
You can count Ryne and myself in. I got a buddy that wants to dyno his car, so you could count him in too!

haloman
06-02-2007, 12:17 PM
He hasnt called me back yet so I am going to call back on Monday.

haloman
06-06-2007, 06:29 PM
Well between me turning 21 and being really busy at work I havent much time to be able to call this guy back but as soon as I do i'll let you guys know whats up.

haloman
06-11-2007, 01:54 PM
I called the super bike shop again and left another message. The guy I talked to said a Saturday would probably be out of the question but He is going to have Gary give me a call.

haloman
06-12-2007, 07:37 PM
Pulls in Sturgis this weekend: Let me know who all is going
http://www.dieseltruckresource.com/dev/showthread.php?p=1550519#post1550519

haloman
06-24-2007, 04:29 PM
Check these threads out guys:
http://www.dieseltruckresource.com/dev/showthread.php?t=156975
http://www.dieseltruckresource.com/dev/showthread.php?t=156954

haloman
07-02-2007, 09:37 AM
No go on the dyno at the Super Bike shop. I am going to try IVY Tech and see what they can/would do.

What about shirts. It would be ten bucks to get the logo on the back with you bringing me the shirt. I need around 15 of these to do this

O791challenger
07-12-2007, 06:34 PM
Dan, there is a dyno in owensboro. I was told he is diesel friendly, I will get his contact info and you or I can give him a call!

haloman
07-12-2007, 06:35 PM
Awesome I'll give him a call. Thats what a pres. is supposed to do right? lol

haloman
07-17-2007, 02:34 PM
Dan, there is a dyno in owensboro. I was told he is diesel friendly, I will get his contact info and you or I can give him a call!

Any News....?????

O791challenger
07-23-2007, 09:07 PM
Any News....?????

Not yet! still tryin to get the info from my buddy.

haloman
07-24-2007, 11:48 AM
Thats cool, Just let me know. :)

haloman
08-07-2007, 06:11 PM
How are the chapter members doing? heeeeellllllllooooooooo.....
Everyone got their rooms for terre haute?

haloman
08-14-2007, 12:43 PM
Gary from Speedy Muffler in O'boro got back to me and they would be instrested in a dyno day. He had concerns about duallys and smoke and I suggested that duallys take off there outer rims and to get a long piece of flex pipe to evacute the smoke. So what day would be good for most everyone? I was thinking late september maybe the 29th or 22nd. After the dyno we could all go eat at Moonlite for some BBQ. What does the group say?

O791challenger
08-14-2007, 04:05 PM
I know I am down if I still have my truck and all the crap on it. Ryne is down also. How much did he say 75?

Gary from Speedy Muffler in O'boro got back to me and they would be instrested in a dyno day. He had concerns about duallys and smoke and I suggested that duallys take off there outer rims and to get a long piece of flex pipe to evacute the smoke. So what day would be good for most everyone? I was thinking late september maybe the 29th or 22nd. After the dyno we could all go eat at Moonlite for some BBQ. What does the group say?

haloman
08-14-2007, 04:13 PM
I know I am down if I still have my truck and all the crap on it. Ryne is down also. How much did he say 75?

Still working out a price, and you could dyno to see how much a stock 6.7 puts down. ;)

haloman
08-20-2007, 03:33 PM
Pics and Vids from Sunday:
http://www.dieseltruckresource.com/dev/showthread.php?t=165607

rynemurch
08-23-2007, 12:11 AM
I need someone to hook up this 12 I got for my truck!

haloman
08-23-2007, 11:37 AM
I need someone to hook up this 12 I got for my truck!

Do you have all the nesscesary wires and stuff, if so I can help you out.

rynemurch
08-23-2007, 02:31 PM
Do you have all the nesscesary wires and stuff, if so I can help you out.

I dont know what I need. I still have the factory cd player

haloman
08-23-2007, 02:36 PM
I dont know what I need. I still have the factory cd player

You need a speaker wire to rca converter $15ish at Custom Audio. And a amp and speaker box and amp wiring kit.

rynemurch
08-23-2007, 02:41 PM
You need a speaker wire to rca converter $15ish at Custom Audio. And a amp and speaker box and amp wiring kit.

I have an amp and 8guage power wire. can we get that stuff at walmart

rynemurch
08-26-2007, 01:39 PM
DAN

Call me up when u get back so I can give you those pic off my cam.

rynemurch
08-27-2007, 07:00 PM
back to the top

haloman
08-28-2007, 11:06 AM
Ryne are you wanting to update your smarty Thrusday?

rynemurch
08-28-2007, 06:13 PM
Ryne are you wanting to update your smarty Thrusday?

Thats cool with me I might have to help my dad during the day so just let me know what time is best

haloman
08-28-2007, 06:17 PM
Thats cool with me I might have to help my dad during the day so just let me know what time is best

I have to be at work by two till seven on Thrus and I am off all-day Friday.

rynemurch
08-28-2007, 06:20 PM
I have to be at work by two till seven on Thrus and I am off all-day Friday.

You just want to do it on friday

haloman
08-28-2007, 06:25 PM
You just want to do it on friday

We can, that would be fine with me.

Here are the Direction to Columbus:
Click Me (http://www.mapquest.com/directions/main.adp?go=1&do=nw&rmm=1&un=m&cl=EN&ct=NA&rsres=1&1ffi=&1l=&1g=&1pl=&1v=&1n=&2ffi=&2l=&2g=&2pl=&2v=&2n=&1pn=&1a=&1c=henderson&1s=ky&1z=42420&2pn=&2a=&2c=columbus&2s=in&2z=&r=f)

I dont know if all of us want to go or not, we could make that out dyno day and make the bbq a seperate event on a difffernt day.... That would work for me.

rynemurch
08-28-2007, 06:28 PM
We can, that would be fine with me.

Here are the Direction to Columbus:
Click Me (http://www.mapquest.com/directions/main.adp?go=1&do=nw&rmm=1&un=m&cl=EN&ct=NA&rsres=1&1ffi=&1l=&1g=&1pl=&1v=&1n=&2ffi=&2l=&2g=&2pl=&2v=&2n=&1pn=&1a=&1c=henderson&1s=ky&1z=42420&2pn=&2a=&2c=columbus&2s=in&2z=&r=f)

I dont know if all of us want to go or not, we could make that out dyno day and make the bbq a seperate event on a difffernt day.... That would work for me.

You the prez so what you say we do![laugh]

Just call me or put something on our thread about friday

haloman
08-28-2007, 06:36 PM
You the prez so what you say we do![laugh]

Just call me or put something on our thread about friday

I'll call you Thrus about Fri.. I think The October date will be better since everyone should have some more stuff done (I.E. trannies, gauges, boxes), so who all wants to go up there?

O791challenger
08-28-2007, 06:46 PM
I'll call you Thrus about Fri.. I think The October date will be better since everyone should have some more stuff done (I.E. trannies, gauges, boxes), so who all wants to go up there?

When is it? You still want those gauges the price for you dropped $50.00! We could probly work out a Cory deal if you want them.

rynemurch
08-28-2007, 06:48 PM
I'll call you Thrus about Fri.. I think The October date will be better since everyone should have some more stuff done (I.E. trannies, gauges, boxes), so who all wants to go up there?

count me in
[director]

haloman
08-28-2007, 06:54 PM
When is it? You still want those gauges the price for you dropped $50.00! We could probly work out a Cory deal if you want them.

Here is the Info on the dyno day.Click me (http://www.tstproducts.com/index.asp?PageAction=VIEWPROD&ProdID=172)

I could do that price, It'll have to be the 1st week of september (so like next week) when I get $$ from my phone sales tho. Sounds like another install party is in order. [guitar]

rynemurch
08-28-2007, 07:12 PM
Septer so when are you going to go get that white 6.7 sport

O791challenger
08-29-2007, 11:04 AM
when 3D knocks another 7200 off!

Septer so when are you going to go get that white 6.7 sport

rynemurch
08-29-2007, 06:46 PM
Dan
When are my dyno video going to be up!

No hurry j/w.

haloman
08-30-2007, 02:14 PM
http://picasaweb.google.com/slayer.dan/ScheidDieselExtravaganza07[/QUOTE]

Pics are up there, still working on vids.

rynemurch
08-31-2007, 12:53 AM
Dan thanks so much for doing all the downloads for my smarty! I got to say you are the man

haloman
08-31-2007, 04:54 PM
No prob Ryne, I am updating Cory's right now and we getting ready to put in his tranny.

rynemurch
08-31-2007, 05:49 PM
No prob Ryne, I am updating Cory's right now and we getting ready to put in his tranny.

Where at I would like to come out and help

O791challenger
08-31-2007, 08:36 PM
When Ryne says help out he means run around looking at shinny stuff!

Where at I would like to come out and help

haloman
09-01-2007, 11:03 AM
When Ryne says help out he means run around looking at shinny stuff!

Ryne actually did help last night. Holding a flashlight counts right?

rynemurch
09-01-2007, 02:39 PM
Ryne actually did help last night. Holding a flashlight counts right?

come on now give me some credit!

haloman
09-01-2007, 02:43 PM
come on now give me some credit!

I did, you also handed parts and turned the engine and moved the shifters. We all helped some.[guitar]

rynemurch
09-03-2007, 10:58 PM
what time is everyone meeting sunday? I just want to know so I can make plans

rynemurch
09-03-2007, 10:59 PM
what time is everyone meeting sunday? I just want to know so I can make plans[guitar]

rynemurch
09-03-2007, 11:00 PM
Why did it post it twice

haloman
09-03-2007, 11:04 PM
I dunno it was prolly your nets. Dont worry about it you can go to edit under the post and delete it (the post). I am wanting to start at one on Sunday if that is cool with Josh, I've asked him but havent got a response yet.

O791challenger
09-04-2007, 04:09 PM
Ryne actually did help last night. Holding a flashlight counts right?

It only counts if he stood still for more than 3 minutes!

haloman
09-04-2007, 04:13 PM
Hey Josh what about Sunday? Did you get my text?

O791challenger
09-04-2007, 06:54 PM
Hey Josh what about Sunday? Did you get my text?

I got it, have to see what time the bears game comes on. Then I will let you know for sure.

haloman
09-05-2007, 04:11 PM
I got it, have to see what time the bears game comes on. Then I will let you know for sure.

If you want to wait until you get ready to trade in your truck thats cool with me. I am not not that big of a rush. If sunday is not cool I can wait. I dont NEED the guages right now.

rynemurch
09-06-2007, 12:44 AM
Dan

We have to try to get that NO SPEEDO SOFTWARE thats all I want. I hate when my trucks stops pulln!!!! Try to find out what Bobs # is and Ill call him up!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!

haloman
09-06-2007, 11:36 AM
Dan

We have to try to get that NO SPEEDO SOFTWARE thats all I want. I hate when my trucks stops pulln!!!! Try to find out what Bobs # is and Ill call him up!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!

I sent him an email. He will let me know ASAP

rynemurch
09-07-2007, 02:59 PM
I sent him an email. He will let me know ASAP

Have you heard from BOB!!!

haloman
09-07-2007, 03:04 PM
Have you heard from BOB!!!

not a peep... I think it is all hush hush for now.

rynemurch
09-07-2007, 04:32 PM
K, what about 2nite you think it got rain out?

haloman
09-07-2007, 04:33 PM
Call lance he is supposed to get the word from darin.

rynemurch
09-07-2007, 04:53 PM
just did no word yet

rynemurch
09-07-2007, 05:29 PM
Wheres our dyno videos at?[laugh]

rynemurch
09-08-2007, 04:30 PM
Are we still down for our meet cause meuth wants to know so he can come! Another member to the list

haloman
09-08-2007, 04:44 PM
Are we still down for our meet cause meuth wants to know so he can come! Another member to the list

My shop is full of stuff my dad is working on for fall harvest, so no meet tommorow, it'll have to wait until my dad starts harvesting and gets the shop cleared out. Did you ever figure out how that guy was that was at Warrren's job site?

rynemurch
09-08-2007, 06:22 PM
ok, I think it was jays98dodge warren was talking about

haloman
09-12-2007, 02:19 PM
Dyno Vids from Schieds Finally!!!!!!:

http://www.youtube.com/watch?v=nBW_mm0cl8I
http://www.youtube.com/watch?v=kkBkvjV0Pe8
http://www.youtube.com/watch?v=Kf4oa3jbVgk
http://www.youtube.com/watch?v=3op-awswnV4

rynemurch
09-13-2007, 03:59 PM
Thanks dan!

rynemurch
09-16-2007, 09:36 AM
Dan,
Can I borrow your card I need to get some fuel![laugh]

haloman
09-16-2007, 12:33 PM
Dan,
Can I borrow your card I need to get some fuel![laugh]

What could I do the ATM's were broke also? I was so [verymad] but could do nothing about it.

rynemurch
09-20-2007, 04:05 PM
Josh, are you out there!!!!!!!!!!!!!!!!!!!!!

haloman
09-20-2007, 04:50 PM
Josh, are you out there!!!!!!!!!!!!!!!!!!!!!

I think he has found another companion beside his DTR buddies..:( just ribbing you Josh[laugh]

rynemurch
09-22-2007, 02:45 PM
Dan, Do you know who all wants to go to the tst event?

haloman
09-22-2007, 02:48 PM
Dan, Do you know who all wants to go to the tst event?

Me you Darin Warren Lance. I dont know who else.Rusty Casey Marcus Maybe? Cory Luke Justin and Justin

rynemurch
09-22-2007, 03:13 PM
I was just rtyn to figure out how many people are going I talked to rusty last nite and he ask who was going so I was trying to find out!

rynemurch
09-27-2007, 05:44 PM
When are we going to have another meeting? Also dan are we the only two in our chapter still cause know one every talks here anymore?[coffee]

moorekh
09-27-2007, 06:11 PM
I guess I need to be on here too! Harrodsburg, Ky/Kydtr member

rynemurch
09-27-2007, 06:33 PM
I guess I need to be on here too! Harrodsburg, Ky/Kydtr member

YES YOU DO!
Hey where is that located at?[duhhh]

moorekh
09-27-2007, 06:39 PM
Mercer Co. we are about 30 miles south of Lexington. In between Danville and Lawrenceburg

rynemurch
09-27-2007, 06:47 PM
oh! Thats a pretty good drive from here!

On OCt. 6 there is a TST dyno day and we are going if you would like to go.

moorekh
09-27-2007, 06:51 PM
thats my fall break from school. I'm waiting on the new quadbox before I dyno. I wanna see some high numbers[laugh] I'm only running an XZT+ right now and it's great for DD but not enough for racing.

rynemurch
09-27-2007, 06:59 PM
You dont have to dyno you could just make a day out of it and just check out the event and meet people here on DTR! Heres the link about it!

Have you ever dyno?

http://www.dieseltruckresource.com/dev/showthread.php?t=168086

FarmerJim
09-27-2007, 08:17 PM
Some of us just read cause we do not have much to say. Foggie thing I guess. (lol) I will try to make dyno day but do not dyno my rig.

moorekh
09-27-2007, 08:32 PM
no I never have. With what I have I would guess mid 3XX and 8XX lbs or something like that. I ran it a couple of times on the strip and was gettin low 14's on 2wd launches and my old comp box due to the lack of a billit input and no lockup switch. The trucks a 13 sec. truck with the right tuning, a 4wd launch and a lockup switch. I really want the race quad box so I can hopefully see some good numbers.

haloman
09-27-2007, 09:39 PM
Man I go out for couple of hours and we have like 8 new posts. I hope everyone can make the TST dyno day. I am not going to dyno my truck but going for the atmosphere and I get to meet the G/F's parents afterwards.

Thanks for welcoming the new guy Ryne and welcome, PM me if you want the address to send membership papers too. I talked to Josh the other day on myspace and he isnt going to the dyno day. :( I dont think he is around here at all anymore.

rynemurch
09-28-2007, 07:37 PM
Dan,

That man is still mad at how loud ur truck is!![laugh]

haloman
09-29-2007, 09:12 AM
Dan,

That man is still mad at how loud ur truck is!![laugh]

I dont even want to hear it. When you texted me I had no idea who had a green truck.[duhhh] Since my truck is not one that ppl talk about I was confused.

Kroner
09-29-2007, 08:07 PM
so whens the next meeting?

haloman
09-30-2007, 10:44 AM
so whens the next meeting?

The next official thing we are all going to is the TST dyno in Columubs, IN next weekend, then I plan on having a wrenching/bs day the end of october.

rynemurch
10-04-2007, 09:01 PM
Dan, When are you going to have time to download the new smarty update so you and I can run 130 MPH down the highway![laugh]

FarmerJim
10-05-2007, 08:59 AM
Dan

What time does the TST dyno thing start?

haloman
10-05-2007, 11:59 AM
Dan

What time does the TST dyno thing start?

I think its like a when ever you get there type of deal. We are planning on leaving Henderson at 7am CST Sat. morn which should put us up there at 11am EST in Columbus.

haloman
10-05-2007, 12:00 PM
Dan, When are you going to have time to download the new smarty update so you and I can run 130 MPH down the highway![laugh]

You ride up with me tommorow and I'll update it with my laptop on the way.

FarmerJim
10-06-2007, 07:36 PM
Dan

Enjoyed our conversation today at the TST dino day. To bad the other guys had to work and could not make it. Keep up the good work with the chapter.

haloman
10-07-2007, 03:53 PM
Dan

Enjoyed our conversation today at the TST dino day. To bad the other guys had to work and could not make it. Keep up the good work with the chapter.

Thanks for making it Jim, I had a good time talking to you and I am glad you got to meet some more DTR members.

RAT_03
10-07-2007, 10:32 PM
gosh cant believe you all let daniel down by not showing up. One day in life you will need something and he will not be there for you.j/k lol ok daniel i have em heck for ya lol

Shaun

haloman
10-08-2007, 09:01 AM
gosh cant believe you all let daniel down by not showing up. One day in life you will need something and he will not be there for you.j/k lol ok daniel i have em heck for ya lol

Shaun

Thanks Shaun, I wish you would've put your truck on the dyno, your buddies truck sounded awesome at 4k when the clutch slipped.

haloman
10-08-2007, 12:45 PM
Hey Ryne, Read this thread about propane to remove all doubts in your mind:
http://www.dieseltruckresource.com/dev/showthread.php?t=172357

RAT_03
10-08-2007, 06:31 PM
Thanks Shaun, I wish you would've put your truck on the dyno, your buddies truck sounded awesome at 4k when the clutch slipped.

I would if my clutch didnt slip also lol

rynemurch
10-08-2007, 09:36 PM
Hey Ryne, Read this thread about propane to remove all doubts in your mind:
http://www.dieseltruckresource.com/dev/showthread.php?t=172357

No more propane for me!

I wish I could of went but I had to work to get more money for my new tranny!!![laugh]

haloman
10-09-2007, 11:01 AM
No more propane for me!

I wish I could of went but I had to work to get more money for my new tranny!!![laugh]

I really like Jetpilots statements "Powerstrokes need all the fuel they can get" [laugh] Wonder what Darrin would think of that?

rynemurch
10-14-2007, 07:58 PM
Thanks Dan once again for greting my speedo removed I just loved it when we broke 120MPH!!!!!!!!!!!!!!!!!!![roll]

haloman
10-15-2007, 09:02 AM
Thanks Dan once again for getting my speedo removed I just loved it when we broke 120MPH!!!!!!!!!!!!!!!!!!![roll]

It was fun on the closed course with all proper safety equipment.

haloman
10-15-2007, 10:31 AM
I had nothing to do with this ;)

http://www.youtube.com/watch?v=xjI22aEdtkI

rynemurch
10-15-2007, 08:52 PM
I had nothing to do with this ;)

http://www.youtube.com/watch?v=xjI22aEdtkI

Did you see my rail pres. it between 22000 and 24000! Glad we had a closed course to run my truck!

Are we going to make that video this weekend! TOP SECERT!!!![laugh]

haloman
10-16-2007, 08:58 AM
Did you see my rail pres. it between 22000 and 24000! Glad we had a closed course to run my truck!

Are we going to make that video this weekend! TOP SECERT!!!![laugh]

Yea we can, Sunday Night should be good.

rynemurch
10-17-2007, 05:22 AM
Yea we can, Sunday Night should be good.

Alright, JUst give me a call. Make sure that its during daylight hours!

rynemurch
10-18-2007, 09:06 PM
Heres A few times down the track!!

The tundra red lights watch!

Darien is running his propane on this run!!!

http://video.thedieselgarage.com/vid...c900a6e207.htm
http://video.thedieselgarage.com/video/70fcf8dc-e596-44da-acdb-99c900a6e207.htm
http://video.thedieselgarage.com/vid...c900a4ecc9.htm
http://video.thedieselgarage.com/video/4efa5574-5a8b-4c00-a829-99c900a4ecc9.htm

haloman
10-19-2007, 12:52 PM
Hey Ryne, find out what exactly I need for those shirts, Like what format the file needs to be in. DieselDaze can get me what I want.

Thanks for the vids, awesome.

rynemurch
10-21-2007, 09:46 PM
Dan, I will let you know as soon as the parts come in so we can set up for a meet to build Willy's Whistler for my truck!!!!!!!!!![laugh]

haloman
10-22-2007, 10:54 AM
Dan, I will let you know as soon as the parts come in so we can set up for a meet to build Willy's Whistler for my truck!!!!!!!!!![laugh]

I am ready for MO' Whistle!!!!

rynemurch
10-22-2007, 04:28 PM
Here's My first pull with my truck!!!!!!!!!!!

http://video.thedieselgarage.com/video/809a9240-fa56-47e9-92be-99cf00a5f6f9.htm

haloman
10-22-2007, 04:32 PM
Good job on letting her eat a little

rynemurch
10-22-2007, 04:55 PM
Good job on letting her eat a little

I wish you could of went so you could of rode pass and told me what to do so I could of got a better pull!!! [coffee]

haloman
10-22-2007, 05:06 PM
I wish you could of went so you could of rode pass and told me what to do so I could of got a better pull!!! [coffee]

We tried that drag racing remeber? You did good for your 1st pull lets get you hooked to real sled with no speed limit, that was silly, and where you'll be able to get into third gear.

rynemurch
10-22-2007, 05:09 PM
We tried that drag racing remeber? You did good for your 1st pull lets get you hooked to real sled with no speed limit, that was silly, and where you'll be able to get into third gear.

I remeber we talked to much!!![laugh] I know that was hard keeping it under 13mph!

redneck_racer
10-23-2007, 07:18 AM
Hey everyone I am new to the area Stationed at Fort Knox Ky and I have a Few cummins powered vehicles and I am looking for a Chapter to join. My Co-worker told me about a Dyno Day that is trying to be setup in Henderson Ky im not sure if you guys already know about this but my co-worker is on the diesel place forum and he is the one that told me about this.

haloman
10-23-2007, 04:30 PM
Yes sir I am the one that is trying to get it setup, They are getting the dyno setup right up when they get it up and runnning I am going to schedule a day.
I am hitting up all the diesel forums trying to get some intrest in our chapter and dyno day.

redneck_racer
10-23-2007, 07:39 PM
That sounds great I have two co-workers that have diesels. One has a 04 DMAX with a 6 inch lift, exhaust and programmer. and the other has a 02 Dodge CTD with a 5 inch exhaust and leveling kit. We are talking about starting our own chapter but you guys arn't that far and seem like a good bunch of guys. Let me know what goes on in the future.

haloman
10-24-2007, 09:42 AM
That sounds great I have two co-workers that have diesels. One has a 04 DMAX with a 6 inch lift, exhaust and programmer. and the other has a 02 Dodge CTD with a 5 inch exhaust and leveling kit. We are talking about starting our own chapter but you guys arn't that far and seem like a good bunch of guys. Let me know what goes on in the future.

Will do, sounds like you have a very nice truck. Just keep an eye on this thread for updates.

rynemurch
10-24-2007, 08:10 PM
Dan, I got another member to join so Im going to need papers so he can fiil them out. If we have a meet he going to come down and meet everyone!

redneck_racer
10-25-2007, 06:16 AM
What are these papers that you are talking about and do we need to fill them out to join the chapter?

haloman
10-25-2007, 11:28 AM
Dan, I got another member to join so Im going to need papers so he can fiil them out. If we have a meet he going to come down and meet everyone!

Who is it?

What are these papers that you are talking about and do we need to fill them out to join the chapter?

Follow the link here:
http://www.dieseltruckresource.com/forms/USA_Membership.pdf

Print this out and let me know when you finish it and I'll PM you with address to send it to.

Ryne you can come see me for an app or print one out but I have some in my truck.

rynemurch
10-26-2007, 05:24 PM
Dan, my parts didnt come in they took them to the wrong place said it will be monday untill I can get them. [verymad]

rynemurch
10-28-2007, 07:27 PM
Dan, How do your fog lights look at nite while you r driving!

Maybe next meet we will have more people show up! It was nice to see Josh show up!!!!J/J[laugh]

haloman
10-28-2007, 07:49 PM
Yea I am glad we got Josh out of the house, It was spur of the moment so I didnt expect a big turnout. It was good of Tyler to come down from the Burgh. We will plan a bigger meet and give people some more notice instead of the hour notice they got today. LOL

redneck_racer
10-28-2007, 07:58 PM
Hey haloman let me know when the next meet is and I will see if me and my boys can make it.

haloman
10-28-2007, 08:13 PM
Sorry about not letting you know about the meet. It was very spur of the moment. I bought some $20 fog lights at Walmart to replace my corroded stock ones and called some of the local guys to help. It wasnt official or anything. The next meet will be more planned with some more to do. Even tho it took 4hrs to install my fog lights LOL.

rynemurch
10-28-2007, 09:41 PM
Hey it took 4 hours but it sure does look good I think we need to start sellg that set up!! LOL[laugh]

Dan heres your mo [whistle]!@!

90* 4" to 5" (rubber)
5" metal tube about 6" long
45* 5" to 6" (rubber)
6" metal tube about 6" long

It will fit right beside the battery, and the 45* might rub just a little, it's kinda a tight fit, you might need to cut the 90* on the 4" side just a bit, then a bunch of good clamps. That's all you need, pretty easy to find that stuff on the website. That filter # is a 6" open end so it will fit on the 6" tube real well. I think that's about it. There's another guy on here that has the same setup, I gave him all the info. And you want to talk about a heck of a whistle!!! lol If your silencer ring is off. I can't be on the phone under high boost it's insanely loud! lol lol!!!

O791challenger
10-28-2007, 10:17 PM
You guys are funny, I get out of the house all the time. You guys are just a couple of stuck up diesel jerks that never wanna hagout with us normal folk!!!

rynemurch
10-28-2007, 10:23 PM
You guys are funny, I get out of the house all the time. You guys are just a couple of stuck up diesel jerks that never wanna hagout with us normal folk!!!

Whatever, you are always busy! that and you moved to no mans land![laugh]

O791challenger
10-28-2007, 10:30 PM
We cant all make that big money like you Munch!

haloman
10-29-2007, 09:11 AM
You guys are funny, I get out of the house all the time. You guys are just a couple of stuck up diesel jerks that never wanna hagout with us normal folk!!!

I've let you know everytime we are out. How do you like the Map sensor unplug trick? Pretty sweet right?

redneck_racer
10-29-2007, 11:09 AM
explain this map sensor unplug trick to us. im curious.

haloman
10-29-2007, 12:17 PM
It only works with COMP boxes, for it to work with a J/A setup you have to jump the 5v wire of the map sensor to the signal wire on the map sensor. It basically fuels off idle with just blipping the throttle in neutral or park ( no load). This is supposed to light the turbo faster.
Look here for some information:
http://www.dieseltruckresource.com/dev/showthread.php?t=147360

O791challenger
10-29-2007, 04:10 PM
I've let you know everytime we are out. How do you like the Map sensor unplug trick? Pretty sweet right?

Yeah its pretty nice, but I miss my injectors. I am gonna have to get me some more!

haloman
10-29-2007, 04:21 PM
Yeah its pretty nice, but I miss my injectors. I am gonna have to get me some more!

Do it and we will put them in at my place and let everyone know ahead of time so we can make it a meet.

O791challenger
10-29-2007, 05:45 PM
Do it and we will put them in at my place and let everyone know ahead of time so we can make it a meet.

Will do, wont be real soon. Probly end of november.

04smoker
10-29-2007, 05:52 PM
Hey Guys. Been lookin for a chapter in Ky. Pm me for the paperwork and I would love to bring the boys and myself down to your next function. Just let me know when and were. I guess this is for haloman??? Thanks :cool:

haloman
10-29-2007, 06:16 PM
Hey Guys. Been lookin for a chapter in Ky. Pm me for the paperwork and I would love to bring the boys and myself down to your next function. Just let me know when and were. I guess this is for haloman??? Thanks :cool:

Welcome 04smoker... Yes I am the KY Chapter President
Print this out and let me know when you finish it and I'll PM you with the address to send it to:
http://www.dieseltruckresource.com/forms/USA_Membership.pdf

haloman
10-29-2007, 06:17 PM
Will do, wont be real soon. Probly end of november.

Sounds like a good time for a meet. I am starting to gather parts for projector headlights with some super bright bulbs. Anyone that has a project can bring it over to the next meet also.

haloman
10-29-2007, 07:31 PM
Hope Ryne is ready to split the prize with me for doing all the video editing...

http://www.youtube.com/watch?v=lUjz4xTBfOQ

rynemurch
10-29-2007, 09:23 PM
Hope Ryne is ready to split the prize with me for doing all the video editing...

http://www.youtube.com/watch?v=lUjz4xTBfOQ

Yeah, I will help you build ur air intake!

That thing is loud!!!!!!!!!!!!![whistle]

haloman
10-30-2007, 02:16 PM
Ok guys need some input:

Which head lights-
Choice 1 (http://cgi.ebay.com/ebaymotors/94-01-DODGE-RAM-1500-2500-CRYSTAL-HEADLIGHTS-CORNER-4PC_W0QQcmdZViewItemQQcategoryZ33710QQihZ002QQitem Z120176602341QQrdZ1QQsspagenameZWDVW)

or

Choice 2 (http://cgi.ebay.com/ebaymotors/94-01-Dodge-Ram-1PC-Chrome-Headlight-97-98-99-00-Amber_W0QQcmdZViewItemQQcategoryZ33710QQihZ010QQit emZ200167191428QQrdZ1QQsspagenameZWDVW)


I am going to order these bulbs:
http://www.partsquick.com/ProductDetail.asp?i=47467

and the HD harness from LMC

but which headlights? Help!

O791challenger
10-30-2007, 04:32 PM
I like the 1st ones, kinda reminds me of some I have seen before.

haloman
10-30-2007, 04:37 PM
I like the 1st ones, kinda reminds me of some I have seen before.

Are those the ones you have?

rynemurch
10-30-2007, 07:01 PM
I like both but cause josh as the first I would go with the second one!

04smoker
10-30-2007, 08:08 PM
Hey Haloman, I filled out the app. I sent you a pm. I need to know where to send it to and how to get hooked up? L8R.

rynemurch
10-30-2007, 08:54 PM
Hey Haloman, I filled out the app. I sent you a pm. I need to know where to send it to and how to get hooked up? L8R.

Welcome to our chapter. Its going to be nice when we all get together and finally meet one another and to check out each others truck!

haloman
10-30-2007, 09:34 PM
Sent you a P.M back 04smoker.

Ryne that intake is awesome. Cant wait to get one for my truck.

O791challenger
10-31-2007, 01:12 AM
Are those the ones you have?

Yep they sure are.

O791challenger
10-31-2007, 01:13 AM
Welcome to our chapter. Its going to be nice when we all get together and finally meet one another and to check out each others truck!

Quit kissin the new guys butt Ryne![roll]

rynemurch
10-31-2007, 05:27 AM
Quit kissin the new guys butt Ryne![roll]

Im just tryn to be nice! [laugh]

redneck_racer
10-31-2007, 05:47 AM
I have some new parts to install on my 99. but i don't think it can happen at a meet. I need to do head studs, injectors and head gasket. do you guys think we can do that in one meet.

haloman
10-31-2007, 11:07 AM
I have some new parts to install on my 99. but i don't think it can happen at a meet. I need to do head studs, injectors and head gasket. do you guys think we can do that in one meet.

I know injectors we can do, but the studs and gasket I dont know about.

haloman
10-31-2007, 11:16 AM
Yep they sure are.

Darn, I am leaning towards option two. I havent seen the whole piece with just the amber reflectors.

rynemurch
10-31-2007, 07:23 PM
I have some new parts to install on my 99. but i don't think it can happen at a meet. I need to do head studs, injectors and head gasket. do you guys think we can do that in one meet.

I bet we can figure out how to do the head studs and gasket. If we need advice we can ask here on dtr or just call Luke up and have him stop by.[coffee]

O791challenger
11-01-2007, 02:34 AM
I bet we can figure out how to do the head studs and gasket. If we need advice we can ask here on dtr or just call Luke up and have him stop by.[coffee]

Murch, you know I can do anything. We can do all that in one meet, if it were 5 days long!!

redneck_racer
11-01-2007, 07:32 AM
I know how to do the work I was just joking about doing it at a meet cause i need to deck the head and block before i re-install the new head gasket and studs.

haloman
11-01-2007, 11:05 AM
I know how to do the work I was just joking about doing it at a meet cause i need to deck the head and block before i re-install the new head gasket and studs.

Thats cool. [laugh] We can try and figure anything out.

O791challenger
11-01-2007, 09:14 PM
Well Dan, what turbo do I need with what I have and say some mach 4's?

rynemurch
11-01-2007, 09:41 PM
Josh, are you still goin this weekend? If yes what time and do you plan on stayg down there?

O791challenger
11-02-2007, 01:34 AM
Josh, are you still goin this weekend? If yes what time and do you plan on stayg down there?

If you are referring to the lake, then yes we are still goin. We are leaving tomorrow night after I get off work and coming back sunday. I think we are gonna go to lamberts sunday too.

I got the bomb all fixed and it is ready for some ridin!!!

haloman
11-02-2007, 09:07 AM
Well Dan, what turbo do I need with what I have and say some mach 4's?

A SPS 62/14 or PS 62/14 if you want to stay small and around 450hp.

haloman
11-02-2007, 03:37 PM
Parts for my intake- I am saving all the links here for later.
Next Month's Project

EAAU6081 Filter (http://www.amsoil.com/StoreFront/SearchResult.aspx?CategoryID=346)

4" to 5" 90* (http://store.airflo.com/reinel90de5t.html)

5" Pipe (http://store.airflo.com/al5.html)

5" to 6" 45* adapter (http://store.airflo.com/45hl60r50.html)

6" tube (http://store.airflo.com/al6.html)

haloman
11-02-2007, 03:38 PM
. I think we are gonna go to lamberts sunday too.



Catch a roll for me!!!!!!!!!

rynemurch
11-04-2007, 11:01 PM
I just thought I would let everyone know that I shot a 12 pointer with my bow. Biggest deer I have killed!!!!!!!!!!!!1[roll][coffee]
Dont know how to post pics!:(

O791challenger
11-05-2007, 12:53 AM
I just thought I would let everyone know that I shot a 12 pointer with my bow. Biggest deer I have killed!!!!!!!!!!!!1[roll][coffee]
Dont know how to post pics!:(

Whatever, how come I havent heard about this yet? Is it bigger than Daves big deer[laugh]

haloman
11-05-2007, 09:24 AM
I just thought I would let everyone know that I shot a 12 pointer with my bow. Biggest deer I have killed!!!!!!!!!!!!1[roll][coffee]
Dont know how to post pics!:(

Congrats!!!!!! :cool:

haloman
11-05-2007, 04:10 PM
WhooHoo, Getting Gauges if Josh doesnt change his mind.

O791challenger
11-05-2007, 04:22 PM
Not gonna change my mind bud, it is made up. Tired of wanting to spend thousands of dollars on my truck.

haloman
11-05-2007, 04:23 PM
Not gonna change my mind bud, it is made up. Tired of wanting to spend thousands of dollars on my truck.

Going to try and hit up up cory on your FASS?

O791challenger
11-05-2007, 04:52 PM
Going to try and hit up up cory on your FASS?

Probly gonna keep my FASS.

haloman
11-06-2007, 04:53 PM
What does everyone think about Sunday the 17th to put in the headlights and gauges on my truck? And whatever anyone else whats to do.

O791challenger
11-06-2007, 07:20 PM
Sounds good to me Prez. Dont have much on the books thru the rest of the year.

haloman
11-07-2007, 02:21 PM
Sounds good to me Prez. Dont have much on the books thru the rest of the year.

Cool..

Ryne?

Another others want to come by?

rynemurch
11-07-2007, 05:56 PM
You know me Ill be there! I going to fix my intake and paint it!

haloman
11-09-2007, 12:18 AM
Video is up on Bullydog!!!!! Woohooo Hope we win

http://www.bullydog.com/Video_Contest.php?month=10

olwhitey
11-09-2007, 05:11 PM
hey guys. i was lookin around on here and noticed a ky chapter and everything so i'd like to join the group if yall dont mind. so i guess i need to print that paperwork out i saw on an earlier thread but dont know what to do with it!!! and i ain sure if i will b able to go to all the get togethers cus of school and work and girlfriend. [duhhh] hope to b part of the group.
and im out of Frankfort btw!!

haloman
11-09-2007, 05:18 PM
Welcome Olwhitey. Fill out the paperwork and post when you get it done and I'll Pm you the address to send it to. Hope you can make it over to this part of the state to some of our meets.

rynemurch
11-09-2007, 09:56 PM
Video is up on Bullydog!!!!! Woohooo Hope we win

http://www.bullydog.com/Video_Contest.php?month=10

I hope we do too!!!

redneck_racer
11-11-2007, 09:41 AM
Haloman is there any word about that Dyno Day that you were trying to set up?

haloman
11-11-2007, 03:50 PM
Not yet. I am planning on going and asking them about it this week. They have got it put in and running so I am going to check i out.

redneck_racer
11-12-2007, 03:02 PM
To everyone in the Kentucky Chapter. I am not currently a member of the chapter but i want to be. Me and my family are going through some tough financial problems right now so i am selling some parts that I bought for my 99 24v cummins. all parts are brand new never been installed.

Cometic Head gasket $200.00
300 HP Injectors with O-rings and Copper Washers $350.00
ARP Head Studs $350.00
Valve Cover gasket $25.00

All Items are OBO please let me know you can reach me at 208-569-6963
I live on Fort Knox army base

Thanks everyone

haloman
11-12-2007, 03:08 PM
To everyone in the Kentucky Chapter. I am not currently a member of the chapter but i want to be. Me and my family are going through some tough financial problems right now so i am selling some parts that I bought for my 99 24v cummins. all parts are brand new never been installed.

Cometic Head gasket $200.00
300 HP Injectors with O-rings and Copper Washers $350.00
ARP Head Studs $350.00
Valve Cover gasket $25.00

All Items are OBO please let me know you can reach me at 208-569-6963
I live on Fort Knox army base

Thanks everyone

Sorry to hear about that. I'll let everyone know about these products. Dont forget about the DTR classifieds here also.

redneck_racer
11-12-2007, 03:10 PM
Also I have 4 brand new Kumho AT tires that are mounted and ballanced on stock 2ND gen Wheels. The tires are load range E I would like to get around $400 for them but they are also OBO.

Thanks agian guys

O791challenger
11-12-2007, 06:31 PM
Also I have 4 brand new Kumho AT tires that are mounted and ballanced on stock 2ND gen Wheels. The tires are load range E I would like to get around $400 for them but they are also OBO.

Thanks agian guys

What size are they?

redneck_racer
11-12-2007, 07:38 PM
oh sorry they are 265/75R16

haloman
11-15-2007, 11:22 AM
Hey Josh, This sunday wont be good for me to put those gauges in. I have a huge group project due and my group wants to get together that day. I can put a deposit on those gauges if you want. If you sell them to someone else I wont be offended, I just have alot of school stuff going on and trying to find another job also.

O791challenger
11-15-2007, 05:47 PM
we can do it whenever, and I am not gonna sell em to anyone else. They are yours whenever you get ready for em.

haloman
11-18-2007, 04:23 PM
Congrat Josh. I can see us all at the wedding blowing smoke at yall as you two are walking out. LOL

olwhitey
11-19-2007, 10:04 PM
finally got around to fillin out the paperwork. so where i need to send it to haloman?

rynemurch
11-21-2007, 07:59 AM
Dan, Have you heard anything about the dyno in owensboro from ur buddy?

haloman
11-21-2007, 10:17 AM
Not yet. He is supposed to call me and let me know.

haloman
12-05-2007, 06:07 PM
Hey guys, an update on me. I started my new job on monday. Been real busy with that. Hows everything going with you guys? Josh did your fuel mileage go back up after trying power service?

rynemurch
12-06-2007, 05:25 PM
m Fuel Mileage went down bad what is going on?

haloman
12-06-2007, 05:27 PM
Ryne's Heavy Foot = Poor Mileage. Try some Power Service. Its in the White Jug.

rynemurch
12-06-2007, 05:36 PM
I been taking it easy and its back to stock and i ame getting poor milage

rynemurch
12-06-2007, 05:37 PM
Thinking about trading it in on a NEW LMM!!!!!!!!!!!!!!!!!!!!!

haloman
12-06-2007, 05:39 PM
1. Try Some Power service to help combat Winter fuel.
2. Why? all that emmision stuff is causing worse mileage.

rynemurch
12-06-2007, 05:40 PM
2. Why? all that emmision stuff is causing worse mileage.[/QUOTE]

More power!

haloman
12-06-2007, 05:42 PM
Did you forget you have a Smarty? New updates are released today. Both trucks will need the same type of upgrades for the same amount of power. (fuel tranny etc).

rynemurch
12-06-2007, 05:44 PM
Did you forget you have a Smarty? New updates are released today. Both trucks will need the same type of upgrades for the same amount of power. (fuel tranny etc).

Im just playn with you!! we need to update my smarty![laugh]

haloman
12-06-2007, 05:45 PM
I know you were. You working on Saturday Morning?

rynemurch
12-06-2007, 05:48 PM
I know you were. You working on Saturday Morning?

NO! Why?

haloman
12-06-2007, 05:49 PM
NO! Why?


Update your Smarty on Sat morn?

rynemurch
12-06-2007, 05:52 PM
Update your Smarty on Sat morn?

What time do u want to do it! Im going duck hunting in the morn

haloman
12-11-2007, 12:47 PM
Ok guys possible Meet. Sat Dec 29 at my place. I was wanting to start around 11am and maybe have some food and drink if you guys wanted to bring stuff. Everyone is welcome just ask me for directions.

So far I've talked to:
Ryne, Corey, Tyler, Brandon, Luke, Bo.

Still need to contacts/ hear from:
Warren, Josh, Lance

Anyone else?

Idea on the food? Who wants to bring what?

Dwitt0187
12-12-2007, 12:30 PM
I Want To Join The Kydtr Club How Do I Go About Doing So I Would Be Interested In Meeting Some Other Diesel Junkies

Hired Gun
12-12-2007, 12:32 PM
I would like to come, but I will be in Hawaii still. However when the TS Performance gig is going on, I will be there and would love to meet some of you guys from down south of me. Thanks for the invite over at kydtr Daniel.

haloman
12-12-2007, 01:15 PM
I Want To Join The Kydtr Club How Do I Go About Doing So I Would Be Interested In Meeting Some Other Diesel Junkies

Welcome
See Quote Below:


Print this out and let me know when you finish it and I'll PM you with the address to send it to:
http://www.dieseltruckresource.com/forms/USA_Membership.pdf



I would like to come, but I will be in Hawaii still. However when the TS Performance gig is going on, I will be there and would love to meet some of you guys from down south of me. Thanks for the invite over at kydtr Daniel.

Hey no prob. All of us will be at the TS event in April. Already excited about it. [laugh] Have fun in Hawaii. There should be an indoor pull in Sturgis, KY in Feb/March that I'll let everyone know about.


And if anyone is wanting to come the end of Dec post up and I'll P.M. you directions. :)

FarmerJim
12-13-2007, 09:39 AM
Daniel

Not sure if I can make it at end of December but will try. PM me directions to your place. Long drive from here so is there a KFC where I could pick up a bucket if I get to come.

haloman
12-13-2007, 09:50 AM
Daniel

Not sure if I can make it at end of December but will try. PM me directions to your place. Long drive from here so is there a KFC where I could pick up a bucket if I get to come.

P.M. sent Jim. Basically its HWY 41 all the way into Henderson where you came last time. Then veer off to the right onto green street then right at the stop light to go onto HWY 136 after you get thru Henderson then left onto HWY 359 then I am two miles on the left.

There is a KFC in Henderson if we all decide to eat at my house, I need more guys to commit too bringing something to eat for it to work out.

O791challenger
12-13-2007, 04:50 PM
Ok guys possible Meet. Sat Dec 29 at my place. I was wanting to start around 11am and maybe have some food and drink if you guys wanted to bring stuff. Everyone is welcome just ask me for directions.

So far I've talked to:
Ryne, Corey, Tyler, Brandon, Luke, Bo.

Still need to contacts/ hear from:
Warren, Josh, Lance

Anyone else?

Idea on the food? Who wants to bring what?

You know I am down, and my mileage picked up a little. Not enuff tho!

FarmerJim
12-13-2007, 07:02 PM
Daniel

Thanks for the directions. I will let you know as soon as I know if I will be able to make it. And I will check with you at that time to see if it is still a carry in or not.

Jim

haloman
12-15-2007, 06:02 PM
I'll have some new mods to show off at the meet. My G/F got me Recon Cab Lights, Running Lights and Line of Fire for Christmas. Woohoo!!!!!

rynemurch
12-18-2007, 06:59 PM
Im down to come too!! My truck went into the shop my injection pump was leaking and I think a new trans is going in 2 but not for sure yet!

haloman
12-19-2007, 07:37 AM
Im down to come too!! My truck went into the shop my injection pump was leaking and I think a new trans is going in 2 but not for sure yet!

I hope they get you all fixed up.

rynemurch
12-19-2007, 04:37 PM
Im getting the 07 clear headlights 2morrow I cant wait!!!!!!!!!![director]

haloman
12-20-2007, 12:28 PM
Ok guys I need to figure out who is going to bring what.
Can you guys bring the following:

Ryne: Baked Beans from Thompson's
Josh: Plates and Cups

Anyone else that is coming for sure what can you bring? I think I have the meat covered but we still need drinks, chips and some cookies. And whatever else you guys want to bring.