Ru rammin 2?

My mods are in the signature. gonna set the timing at 16*. also got a bhaf.

Lil Dog

With a stock turbo, you are gonna be hamstrung to around 350-375 RW. IMHO.. Even at that the pyro will need a 5th digit..

95dodgectd

which plate did you grind? probably closer to 350hp maybe. depends on what plate you have and if its full foward or in the center

Ru rammin 2?

its a zero plate full forward. what does the RHP translate to at the crank?

stirpicult

divide the RHP by .70 and .80 and you will have ballpark...so 440-500 ish.

BigErksG2

these numbers might be a little high. with a stock turbo you can only clear up so much fuel. if you add more fuel past the efficiency point you are "putting out the flame" and losing power. saw it happen first hand, person dynoed, swapped injectors, dynoed again and lost 40hp. tuning is key and the timing should really help up top.

Lil Dog

Just from experience, I put down 330 with stock 215's and stock HX35 running around 38psi boost. I was thinking with the GSK and few other mods you might get another 20 ponies out of it. I haven't hit the rollers yet with the stuff I changed out.