rbrettctd

I bought an hx35w for my 1st genner. I thought it had the banks 14 on it, but looking at it today, the housing says holset. It had the banks wastegate on it, which is messed up. Is this the banks setup, or just the Banks bighead? Im hoping I can just order this to replace it. http://cgi.ebay.com/ebaymotors/NEW-B...QQcmdZViewItem

And if it the stock housing, what size would it be? 12? Thanks.

Edit: I see that the Banks housings have their name on them. So it is a Holset. Now to find the size..

rbrettctd

One of you 2nd genners has got to know what I have...Any help?

rbrettctd

Replaced the actuator but still would like to know what size housing I have. THanks.

signature600

The early Banks housings said BANK$ on them...the later one's, were factory Holset's

Look on the housing somewhere...there should be a # 14 on it somewhere if it's a 14cm housing!

Chris

logskidder

There should be a number stamped inside the flange....where it bolts to the exh man , you might have to clean the carbon to see it

rbrettctd

Thanks. Its a 14. I think its Holset. I bought the Banks bighead for the 94+ and it was same.

Rampage1967

BTW sinature600, you got that right spelling Banks with a $ sighn instead of an s . . . . .