Just Installed Boost Fooler + Outlook
#1
Registered User
Thread Starter
Join Date: Mar 2007
Location: St. Louis
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
Just Installed Boost Fooler + Outlook
Just installed my boost fooler today. I have it hooked up with my outlook monitor. The boost fooler is plugged right into the MAP sensor, then the outlook, then the truck harness. It all works fine. The outlook monitor measures a maximum of 18psi. I guess that is what the boost fooler sends as a max psi to the ECM to fool it. I also tried just running the boost fooler and not hooking the MAP connection of the outlook up at all to see if it would read boost through the ALDL. WRONG The outlook does read boost through the MAP and not the ALDL.
Next thing to buy is a mechanical gauge to see how much boost I am actually making. I tell you what it sure does pull like crazy now. Boost Fooler really does work!!!!
Next thing to buy is a mechanical gauge to see how much boost I am actually making. I tell you what it sure does pull like crazy now. Boost Fooler really does work!!!!
#5
Registered User
Join Date: Feb 2007
Location: San Antonio
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
Hey ramble-bee, I put the boost fooler and the truck ran like crap. It took forever to spool up, although once it did it would pull and pull. I took it off it was running so weird. Heard anything from Bud?
Thread
Thread Starter
Forum
Replies
Last Post
beaver76
3rd Gen High Performance and Accessories (5.9L Only)
5
08-07-2007 09:01 PM
Rollin' Smoke
3rd Gen High Performance and Accessories (5.9L Only)
23
06-26-2007 09:04 PM
Baranof
3rd Gen High Performance and Accessories (5.9L Only)
1
04-12-2007 05:52 PM
beaver76
3rd Gen High Performance and Accessories (5.9L Only)
2
03-27-2007 11:11 AM