3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Just Bought an 07 5.9

Thread Tools
 
Search this Thread
 
Old 04-05-2007, 10:23 AM
  #1  
Registered User
Thread Starter
 
01smoker's Avatar
 
Join Date: Feb 2006
Location: Rolla, MO and Blytheville, AR
Posts: 411
Likes: 0
Received 0 Likes on 0 Posts
Just Bought an 07 5.9

Hey guys i guess i will be switching over to your 3rd gen forum from the 2nd gen forum now since I just bought the truck in my sig. I learned alot about the 01 I had from this website. Im hoping to learn just as much if not more about my 07 that I have now.

I know there are a few things you need to do first on the 24 valves like check fuel pressure and and install a FASS and guages to prevent any damage from bombing the crap out of it. Is there anything that I should do first on my 3rd gen before I go to adding performance parts? I know about gauges but is there anything else? Im not real knowledgeable about the 3rd gens just yet, but I plan to be. I plan to do some fairly major mods to this truck like twins, cam, injectors, studs, o-rings, stacked programmers, clutch, exhaust, intake, FASS and whatever else I decide. I already have 5-inch on the way as of this morning.

Also any tips you guys have for me like things I should do to my truck just let me know.

I forgot to ask, at what mileage should I wait to put a programmer on it? It's got 1000 miles on it right now.
Old 04-05-2007, 01:03 PM
  #2  
Registered User
 
omaharam's Avatar
 
Join Date: Jun 2005
Location: Nebraska
Posts: 2,452
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 01smoker
Hey guys i guess i will be switching over to your 3rd gen forum from the 2nd gen forum now since I just bought the truck in my sig. I learned alot about the 01 I had from this website. Im hoping to learn just as much if not more about my 07 that I have now.

I know there are a few things you need to do first on the 24 valves like check fuel pressure and and install a FASS and guages to prevent any damage from bombing the crap out of it. Is there anything that I should do first on my 3rd gen before I go to adding performance parts? I know about gauges but is there anything else? Im not real knowledgeable about the 3rd gens just yet, but I plan to be. I plan to do some fairly major mods to this truck like twins, cam, injectors, studs, o-rings, stacked programmers, clutch, exhaust, intake, FASS and whatever else I decide. I already have 5-inch on the way as of this morning.

Also any tips you guys have for me like things I should do to my truck just let me know.

I forgot to ask, at what mileage should I wait to put a programmer on it? It's got 1000 miles on it right now.
You're already 999 miles late. Someone else that knows more please chime in, but I'm not sure it matters that much since the engine doesn't really break in until 20-30k miles.

Intake and exhaust
gauges
tranny
fueling box/programmer
lift pump
turbo
studs - depending on turbo choice
additional fueling (pressure, programmer, module - whatever compliments your first choice)
modded cp3
injectors anytime after the lift pump
cam and springs
Old 04-05-2007, 01:33 PM
  #3  
Registered User
 
TOLEDO-BEND's Avatar
 
Join Date: Mar 2007
Location: TOLEDO BEND LAKE
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
I Would Not Run a Programmer ! As i Stated in One of my posts here,i Lost My Warranty On My 2006 , Still Fighting It But Dont Look Good . Cought Me on Key Cyc, Before the new update ! I Just Do Not Think It Worth It ? But That Up To You.....JUST THINK LONG AND HARD !

TB
Old 04-05-2007, 01:57 PM
  #4  
Registered User
 
omaharam's Avatar
 
Join Date: Jun 2005
Location: Nebraska
Posts: 2,452
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by TOLEDO-BEND
I Would Not Run a Programmer ! As i Stated in One of my posts here,i Lost My Warranty On My 2006 , Still Fighting It But Dont Look Good . Cought Me on Key Cyc, Before the new update ! I Just Do Not Think It Worth It ? But That Up To You.....JUST THINK LONG AND HARD !

TB
Pretty much anything on that list can cause warranty problems - most of it WILL.
Old 04-05-2007, 02:20 PM
  #5  
Registered User
 
bthanks's Avatar
 
Join Date: Jan 2007
Location: Missouri
Posts: 85
Likes: 0
Received 0 Likes on 0 Posts
key cyc

If he runs a smarty it wont mess with the key cyc. It leaves no footprint. And I think if he is going twins, fass, stacked programmers, cam, and what not I dont believe he is to worried about the warrenty anyways.
Old 04-05-2007, 03:24 PM
  #6  
tcr
Registered User
 
tcr's Avatar
 
Join Date: Sep 2003
Location: Austin, TX
Posts: 3,188
Likes: 0
Received 0 Likes on 0 Posts
You will ABSOLUTELY have the most fun voiding your warranty and trashing your tranny/clutch w/ a Smarty!







Just kidding, I don't think anyone has PROVEN them detectable yet, you'll have some yaahoos talkin' trash, saying that they are though.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
02Texas_Rattle
24 Valve Engine and Drivetrain
11
12-03-2003 10:53 AM
02Texas_Rattle
24 Valve Engine and Drivetrain
7
11-12-2003 12:46 PM
Monty
General Diesel Discussion
0
11-09-2003 08:07 AM
boughtadodge
12 Valve Engine and Drivetrain
9
11-25-2002 08:21 PM
boehunter49
12 Valve Engine and Drivetrain
9
11-15-2002 09:20 AM



Quick Reply: Just Bought an 07 5.9



All times are GMT -5. The time now is 10:37 PM.