Internal wastegate question
04-11-2009, 05:44 PM
#1
Registered User
Thread Starter
Join Date: Dec 2007
Location: Danbury, Ct
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Internal wastegate question
On my II 64/65 I was trying to set the wastegate and I found a issue. I took the rubber hose off and put shop air to it and it does not open until about 45 psi. I just took the hose off the boost elbow just to get a base line so I dont think the adjustment of the elbow is doing much. What can I do to fix this. Thanks for the help
04-12-2009, 01:59 PM
#2
Registered User
Thread Starter
Join Date: Dec 2007
Location: Danbury, Ct
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Another thing that I noticed is that my when I put it to the wood going about 35mph the boost will go straight to 40-45 put the egts will go to about 1350 and will not drop until I get out of it. I believe that this is to high. Thanks for the help
04-12-2009, 06:02 PM
#4
Registered User
Join Date: Aug 2007
Location: midwest
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
if thats all the higher it goes then dont worry about it, just dont leave it there pulling something up a long hill
Thread
Thread Starter
Forum
Replies
Last Post
Ghost Ram
3rd Gen High Performance and Accessories (5.9L Only)
11
12-30-2007 01:16 PM
ataboy9026
Performance and Accessories 2nd gen only
5
02-22-2006 05:09 AM
MoparRiggan
3rd Gen High Performance and Accessories (5.9L Only)
3
10-13-2005 11:54 AM
