Installing Gauges
03-02-2007, 07:45 PM
#1
Registered User
Thread Starter
Join Date: Apr 2004
Location: Lindrith, NM
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Installing Gauges
I've just purchased a boost and pyro gauges from Geno's. They are the Autometer 2 1/16 inch black-on-black with white letters and a red pointer.
I plan to install them on truck no. 2 in my signature.
I am looking for all the pointers I can get. Anyone?
I plan to install them on truck no. 2 in my signature.
I am looking for all the pointers I can get. Anyone?
03-02-2007, 08:10 PM
#2
Registered User
Join Date: Nov 2006
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
drill the back hole on the manifold not the front you will get a better reading the rear cylinders get hotter than the front. the boost is easy just route hoses and wires good so they wont chafe.
Thread
Thread Starter
Forum
Replies
Last Post
Kman9090
3rd Gen High Performance and Accessories (5.9L Only)
29
12-06-2007 06:43 PM
coontz0473
3rd Gen High Performance and Accessories (5.9L Only)
17
09-22-2006 03:52 PM
dncoy
Performance and Accessories 2nd gen only
4
08-09-2004 07:26 AM