apwcu

So I ordered some Pods and I decided to go ahead and take my factory injectors out this afternoon. The PO told me they were aftermarket just like he told me the turbo was too, which it wasn't. I would like to know if any of you guys could figure out which injectors they are. The numbers say

Bosch 937 KDL 59 P 9 161 245 bar

The tips are 4 hole

Anyone know what these are?

Thanks

Onemoparnut

My stock injector is a Bosch 937 KDL 59 P 9 162 245 bar

deanhinsley1963

The pods are'nt going to be a upgrade are they? I think the stock non/ic sticks are almost as big as pods?

JBradley500

if its a 91.5 then it should be intercooled with the smaller injectors from the factory.

apwcu

It's a 91.5 intercooled truck. So Onemoparnut are the same except the 161,162 number. The only thing I was wondering about is the 4 hole tips.

The number on the tip says 9348.

deanhinsley1963

I thought i/c trucks use 6x9 inj.?

apwcu

From some research I've done, I'm starting to think that it is first gen injector bodies with tips off of a marine injector. I forgot to mention that the po said he put marine injectors in but he lied about the turbo so I didn't really pay attention to it.