info on this turbo
06-15-2009, 05:08 PM
#1
Registered User
Thread Starter
Join Date: Feb 2009
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
info on this turbo
The model # is S400S069 the P/N # 631GC5153AM2X the S/N # J3102 351 R9. Its says it is made for mack truck and has Mack trucks stamped on the comp. housing. I somewhat measured it and the inducer is around a 65mm and the exhaust wheel is around a 71mm or 72mm. The comp housing has 053A and 673121 A stamped on it. The exhaust housing has 697828 DUC384 and 125 B-2 stamped on it. Any input on this will be helpful as far as wat its worth and the input on ppl that have ran one of this as a single. I think it would be good as a single but its kinda small to use as the bottom charger on a twin setup. This truck is a daily driver and im planning on pulling it and racing it as soon as i get some better driveline parts.
06-16-2009, 03:59 PM
#2
Registered User
Thread Starter
Join Date: Feb 2009
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
The model # is S400S069 the P/N # 631GC5153AM2X the S/N # J3102 351 R9. Its says it is made for mack truck and has Mack trucks stamped on the comp. housing. I somewhat measured it and the inducer is around a 65mm and the exhaust wheel is around a 71mm or 72mm. The comp housing has 053A and 673121 A stamped on it. The exhaust housing has 697828 DUC384 and 125 B-2 stamped on it. Any input on this will be helpful as far as wat its worth and the input on ppl that have ran one of this as a single. I think it would be good as a single but its kinda small to use as the bottom charger on a twin setup. This truck is a daily driver and im planning on pulling it and racing it as soon as i get some better driveline parts.
Thread
Thread Starter
Forum
Replies
Last Post
donhov
3rd Gen Engine and Drivetrain -> 2003-2007
4
10-12-2007 11:44 AM
donhov
Other
9
08-16-2006 11:42 PM
ramguy
1st Gen. Ram - All Topics
5
07-03-2003 07:46 AM