Howdy from Super Natural British Columbia
#1
Howdy from Super Natural British Columbia
Seeing as this web site so nicely asked me to introduce myself, might as well oblige.
Just made the jump from the Powerstroke to the Cummins two weeks ago. The truck is a 2004 QC Std. Laramie (almost typed Lariat there, did I mention loooong time powerstroke owner) Dually 4x4 with an 8 ft flat deck and built in gooseneck hitch. Bought it (hope its OK to say this) from Big Sky Dodge in Claresholm, AB.
Can't believe the torque/power of this engine; I'm definitely a Cummins guy from now on. The truck doesn't need much else, but will get an under deck tool box (previous owner had one but removed it prior to trading it in) and eventually a big Edit front bumper. For right now though, the only real disappointment are the headlights, especially the high beams. As soon as I got some dough those will be fixed asap.
And a thanks to the fellow (I'm real bad with names) that did the write up on how to replace the rear rotors on one of these, already had the pleasure of doing those, but with such excellent instructions, they were a breeze to do (except for those bolts mounting the rotors to the back of the hubs, those were on there real good).
Cheers.
Just made the jump from the Powerstroke to the Cummins two weeks ago. The truck is a 2004 QC Std. Laramie (almost typed Lariat there, did I mention loooong time powerstroke owner) Dually 4x4 with an 8 ft flat deck and built in gooseneck hitch. Bought it (hope its OK to say this) from Big Sky Dodge in Claresholm, AB.
Can't believe the torque/power of this engine; I'm definitely a Cummins guy from now on. The truck doesn't need much else, but will get an under deck tool box (previous owner had one but removed it prior to trading it in) and eventually a big Edit front bumper. For right now though, the only real disappointment are the headlights, especially the high beams. As soon as I got some dough those will be fixed asap.
And a thanks to the fellow (I'm real bad with names) that did the write up on how to replace the rear rotors on one of these, already had the pleasure of doing those, but with such excellent instructions, they were a breeze to do (except for those bolts mounting the rotors to the back of the hubs, those were on there real good).
Cheers.
#2
With age comes the cage
Welcome to the site,
Here is a thread that addresses the light issue:
https://www.dieseltruckresource.com/...d-t264073.html
Another member on here is doing the sheet metal upgrade, you put 06-08 fenders, lights and bumper on the truck to get better lights..
Here is a thread that addresses the light issue:
https://www.dieseltruckresource.com/...d-t264073.html
Another member on here is doing the sheet metal upgrade, you put 06-08 fenders, lights and bumper on the truck to get better lights..
Thread
Thread Starter
Forum
Replies
Last Post