hit the dyno yesterday.......
08-24-2007, 10:26 AM
#1
Registered User
Thread Starter
Join Date: Dec 2006
Location: Fresno, Ca
Posts: 842
Likes: 0
Received 0 Likes
on
0 Posts
hit the dyno yesterday.......
couldn't make boost. On the street I hit 55psi, on the rollers I couldn't make more than 32-33psi. It was 102* outside, and even hotter in the shop, maybe that had something to do with it. Made 550.0 hp at 32psi boost. 
I think I'll try again when it's a little cooler outside.... Any ideas?
I think I'll try again when it's a little cooler outside.... Any ideas?
08-24-2007, 11:21 AM
#5
Registered User
Thread Starter
Join Date: Dec 2006
Location: Fresno, Ca
Posts: 842
Likes: 0
Received 0 Likes
on
0 Posts
Dynojet 248. I've dynoed 1x before at a different shop with just the TST, and it spooled up very fast. This time, spool up was very very slow. I'm just trying to break 600 and I'll be done with all the dynoing. Hopefully I'll be over 600 if I can build full boost.
08-24-2007, 12:30 PM
#6
Registered User
Join Date: Jun 2005
Location: Nebraska
Posts: 2,452
Likes: 0
Received 0 Likes
on
0 Posts
I don't really konw that much about dynos, but I do know that when I first dynoed my truck I was only getting about 38psi and on the street I see upper 40s. The dyno was loaded slightly more and it went to 45psi.
Thread
Thread Starter
Forum
Replies
Last Post
Trooperthorn
1st Gen. Ram - All Topics
12
06-09-2014 10:53 PM
DodgeCTD
3rd Gen High Performance and Accessories (5.9L Only)
22
06-21-2008 09:39 AM
Billm2004
3rd Gen High Performance and Accessories (5.9L Only)
38
05-15-2008 06:24 PM
Big Horn
3rd Gen High Performance and Accessories (5.9L Only)
12
05-05-2008 10:19 PM