12 Valve Engine and Drivetrain Talk about the 12V engine and drivetrain here. This is for 1994-1998.5 engine and drivetrain discussion only.

high E.G.T. on stock truck

Old 12-03-2006, 03:51 PM
  #1  
Registered User
Thread Starter
 
somis13's Avatar
 
Join Date: Mar 2006
Location: somis,CA.
Posts: 342
Likes: 0
Received 0 Likes on 0 Posts
high E.G.T. on stock truck

my daily driver has been getting higher e.g.t every day. Friday it got up to 1400, and when I got closer to home the rubber intercooler hose blew off. could a loose hose cause the high e.g.t. or something else and if so, what? I fixed the hose that blew off and tightened the other fittings through out the intake system but cant drive the truck til tomorrow. it makes sense to me that a boost leak would cause the temp to rise, what do you guys thing?
Old 12-03-2006, 04:14 PM
  #2  
Registered
 
blackdiesel's Avatar
 
Join Date: Jul 2005
Location: Omaha, AR
Posts: 4,173
Likes: 0
Received 0 Likes on 0 Posts
deffiently. a boost leak will make it run hot. You should have noticed a severe lack of power too...
Old 12-03-2006, 05:12 PM
  #3  
Registered User
Thread Starter
 
somis13's Avatar
 
Join Date: Mar 2006
Location: somis,CA.
Posts: 342
Likes: 0
Received 0 Likes on 0 Posts
I guess I thought the power loss was from my foot letting the pedal up when the e.g.t. got too high. the boot made a noise when the clamp finally slipped all the way off, then the power loss was really evident. lucky for me it was 2 miles from home, and limped it there. I dont keep the 7/16 deep socket it requires to reinstall those clamps
Old 12-03-2006, 05:25 PM
  #4  
Registered
 
blackdiesel's Avatar
 
Join Date: Jul 2005
Location: Omaha, AR
Posts: 4,173
Likes: 0
Received 0 Likes on 0 Posts
oh yeah, you defiently blew a boot. While your under the hood, check them for splits and cuts.
Old 12-03-2006, 06:31 PM
  #5  
Registered User
 
TxDiesel007's Avatar
 
Join Date: Dec 2004
Location: Laredo
Posts: 3,411
Likes: 0
Received 1 Like on 1 Post
Originally Posted by blackdiesel
oh yeah, you defiently blew a boot. While your under the hood, check them for splits and cuts.
these 12 valves

tend to have the boots shreded (especially the driver side one) when they rub up against the frame, there was a sharp edge on the frame that slit my boots in half, the drivers side one was lost a couple of times.. SO i suggest check both sides of where the boots are for edges..

They do tend to wear out with heat as well, and if they are the stockers chances are they are already shot..

Also u might wanna check the boots that connect the intake hat to the boost tube, those could have gotten loose as well while u are tightening up everything else.

Rick
Old 12-03-2006, 08:18 PM
  #6  
Banned
 
Forrest Nearing's Avatar
 
Join Date: Jan 2004
Posts: 2,800
Likes: 0
Received 0 Likes on 0 Posts
the boots like to rub on the inner fenders... I always bend the sheet metal out of the way an extra amount just for piece of mind
Old 12-03-2006, 08:35 PM
  #7  
Registered User
Thread Starter
 
somis13's Avatar
 
Join Date: Mar 2006
Location: somis,CA.
Posts: 342
Likes: 0
Received 0 Likes on 0 Posts
after looking at mine its the inner fenders that rub, but no cuts. they look old so I wanna put new. where is the gettin place for new boots?
Old 12-04-2006, 11:18 AM
  #8  
Registered User
 
infidel's Avatar
 
Join Date: Dec 2003
Location: Montana
Posts: 14,672
Likes: 0
Received 9 Likes on 9 Posts
Originally Posted by somis13
after looking at mine its the inner fenders that rub, but no cuts. they look old so I wanna put new. where is the gettin place for new boots?
http://www.piersdiesel.com/

Don't know if you still have one but a clogged up cat will also cause high egts.
Old 12-04-2006, 07:16 PM
  #9  
Banned
 
88bird's Avatar
 
Join Date: Dec 2004
Location: Coolidge, GA
Posts: 390
Likes: 0
Received 1 Like on 1 Post
Originally Posted by somis13
after looking at mine its the inner fenders that rub, but no cuts. they look old so I wanna put new. where is the gettin place for new boots?
you can also get them at www.puredieselpower.com call Garrett he'll hook you up....
Old 12-04-2006, 09:54 PM
  #10  
Registered User
Thread Starter
 
somis13's Avatar
 
Join Date: Mar 2006
Location: somis,CA.
Posts: 342
Likes: 0
Received 0 Likes on 0 Posts
thanks for the links on the boots guys, my truck has no cat, it was the boost leak causing the high e.g.t.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jeff04.5
3rd Gen High Performance and Accessories (5.9L Only)
4
06-07-2012 09:12 PM
Josh1979
24 Valve Engine and Drivetrain
7
08-02-2011 02:23 PM
engcogod
24 Valve Engine and Drivetrain
2
07-21-2005 12:45 PM
BCarmicle
3rd Gen High Performance and Accessories (5.9L Only)
9
09-22-2004 12:10 PM
klrmark
3rd Gen Engine and Drivetrain -> 2003-2007
7
09-04-2003 09:37 PM


Thread Tools
Search this Thread
Quick Reply: high E.G.T. on stock truck



All times are GMT -5. The time now is 11:50 AM.