HIDs on 2007 6.7L Help
#1
HIDs on 2007 6.7L Help
Hey Everyone,
I installed HIDs on my 07 6.7L. After installation I checked the lights while engine was off, everything worked great. I then turned engine on and L beams would not work, but H beams would.(dual xenon kit). I was told the voltage to the L beam is intermitant when the engine is on between 9 & 12v and the HIDS need a steady 12v to work. I have tried load capacitors to no avail. The only thing that has workrd was splicing into my parking lights to get the steady 12v but this makes the parking lights unavailable by themselves. Head lights come on when park lights do. Has any one found a way around this
I installed HIDs on my 07 6.7L. After installation I checked the lights while engine was off, everything worked great. I then turned engine on and L beams would not work, but H beams would.(dual xenon kit). I was told the voltage to the L beam is intermitant when the engine is on between 9 & 12v and the HIDS need a steady 12v to work. I have tried load capacitors to no avail. The only thing that has workrd was splicing into my parking lights to get the steady 12v but this makes the parking lights unavailable by themselves. Head lights come on when park lights do. Has any one found a way around this
Thread
Thread Starter
Forum
Replies
Last Post
bbmartin
3rd Generation Ram - Non Drivetrain - All Years
2
02-23-2011 07:49 AM
Checkmate
3rd Generation Ram - Non Drivetrain - All Years
10
02-12-2007 11:39 PM