3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

Help Rear Axle...

Thread Tools
 
Search this Thread
 
Old 09-21-2009, 02:21 PM
  #1  
Registered User
Thread Starter
 
DF5152's Avatar
 
Join Date: Dec 2002
Location: Long Island, NY
Posts: 741
Likes: 0
Received 0 Likes on 0 Posts
Help Rear Axle...

Hi all. Here is the deal, my truck has 85,000+- miles on it has always had a rear end noise but it has been getting worse over the last few weeks. Put a trailer on the back not to long ago and it made it really bad. I serviced the fluid with synthetic and the noise got worse over the next few day. Put the truck in the air you can hear a noise from the pinion. So I changed the U-joint thinking maybe it was going bad and thats easier then the pinion. noise is worse now. So I pulled everything apart expecting to find a bad bearing and EVERY THING LOOKS GOOD. So... I dont want to spend anymore money then necessary to fix this but not sure what I should replace. any Ideas was thinking that the synthetic fluid was to thin and transmitted the noise better. rear went from factory fill to Valvoline at about 40k then just recently within the last few hundred miles mobile one... Tired of all these problem with this truck lately was good till I got it paid off

HELP.
____________
Old 09-21-2009, 05:06 PM
  #2  
Registered User
 
Dr.Dizzle's Avatar
 
Join Date: Sep 2006
Location: Elkton, MD
Posts: 1,240
Likes: 0
Received 2 Likes on 2 Posts
Just a guess,but it could be the rear end ring and pinion gear contact parrern. It could have been installed incorrectly, not ground perfectly to match up with each other or could have broken teeth, leaving metal shavings behind.
Old 09-21-2009, 07:06 PM
  #3  
Registered User
Thread Starter
 
DF5152's Avatar
 
Join Date: Dec 2002
Location: Long Island, NY
Posts: 741
Likes: 0
Received 0 Likes on 0 Posts
no broken teeth on he gears and patter looks fine it really wasnt a gear noise but a bearing noise.
Old 09-21-2009, 07:33 PM
  #4  
Registered User
 
NickBeek's Avatar
 
Join Date: Aug 2007
Location: Upstate, SC
Posts: 728
Likes: 0
Received 0 Likes on 0 Posts
My rear diff has been a little noisy since new. It really hasn't changed much and I now have 112K miles on her. Drive and smile.
Old 09-21-2009, 07:53 PM
  #5  
Registered User
 
st.rodder2's Avatar
 
Join Date: Jul 2009
Location: SW Connecticut
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
I had the same noise in mine. Found that the inner race of the large bearing was all chewed up. Looked like it wasn't heat treated correctly. After I removed the bearing I rotated the outer cage while holding the inner race and felt it grinding.
Old 09-22-2009, 08:14 AM
  #6  
Registered User
 
surfram's Avatar
 
Join Date: Jan 2004
Location: Delaware
Posts: 1,125
Likes: 0
Received 1 Like on 1 Post
Originally Posted by NickBeek
My rear diff has been a little noisy since new. It really hasn't changed much and I now have 112K miles on her. Drive and smile.
My rear diff has always been noisy, but only for the first few miles. After is warms up, no whining/howling. I have just under 100k. I hear it less now that I have a loud exhaust.
Old 09-22-2009, 07:50 PM
  #7  
Registered User
 
dodge35000's Avatar
 
Join Date: Aug 2007
Posts: 129
Likes: 0
Received 0 Likes on 0 Posts
It could be a bad pinion bearing. Do you hear it more during acceleration or deceleration? Is the noise consistent with speed or does it wind up louder with shifts in the transmission?
Old 09-22-2009, 09:31 PM
  #8  
Registered User
Thread Starter
 
DF5152's Avatar
 
Join Date: Dec 2002
Location: Long Island, NY
Posts: 741
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by dodge35000
It could be a bad pinion bearing. Do you hear it more during acceleration or deceleration? Is the noise consistent with speed or does it wind up louder with shifts in the transmission?


The faster you go the louder it gets
Old 09-22-2009, 09:59 PM
  #9  
Registered User
 
dodge35000's Avatar
 
Join Date: Aug 2007
Posts: 129
Likes: 0
Received 0 Likes on 0 Posts
Does it seem like a high pitched noise or lower pitched noise? When you said that you pulled everything apart did you pull the carrier out of the housing or just pull the cover? Did the differential oil have a silvery or metallic look to it? Do you have a pictures of the differential, ring gear or bearings? It will be easier to diagnose with as much information as we can gather about the symptoms.
Old 09-23-2009, 05:25 PM
  #10  
Registered User
 
Dr.Dizzle's Avatar
 
Join Date: Sep 2006
Location: Elkton, MD
Posts: 1,240
Likes: 0
Received 2 Likes on 2 Posts
Does the plug magnet have a substantial amount of grey or silver goo on it?
Old 09-23-2009, 09:07 PM
  #11  
Registered User
Thread Starter
 
DF5152's Avatar
 
Join Date: Dec 2002
Location: Long Island, NY
Posts: 741
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Dr.Dizzle
Does the plug magnet have a substantial amount of grey or silver goo on it?
it had some...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nvr-enuf
3rd Gen Engine and Drivetrain -> 2003-2007
6
01-30-2014 06:56 PM
ian515
3rd Gen Engine and Drivetrain -> 2003-2007
2
07-24-2009 03:22 PM
mudwisr2
HELP!
4
02-22-2008 11:51 AM
MX429
Towing and Hauling / RV
2
08-20-2006 06:41 PM
Fortin
Towing and Hauling / RV
14
01-13-2003 11:38 PM



Quick Reply: Help Rear Axle...



All times are GMT -5. The time now is 08:35 PM.