gecoveyc

Hey guys I need someone with an NV5600 transmission to crawl under their truck and measure the thickness of the mounting plate suppot. This the the little piece directly under the very back of the tranny that connects the tranny to the cross member mount. It looks to be only a bout an inch think possibly. It is the plate that is connected by 4 bolts to the bottom of the tranny and 2 outer bolts that connect the plate to the cross member.

If someone can just measure the thickness of it I would greatly appreciate it. I'm tired of messing with the dealerships and parts stores trying to find one of these so I am just going to fab up my own. It's just a plate of metal. I just need to know how thick to make it. Let me know thanks guys.

gecoveyc

If anybody gets a break from work or just gets bored and can go out and just eyeball how thick that plate is this morning I would greatly appreciate it.

I know it's a weird favor to ask and a pain the rear to crawl under there to look at that but you would be helping me out a lot. Thanks

gecoveyc

1-1/8" is the magic number. Thanks guys