I started pulling my injector pump the other day and now have come to the realization that the whole front of the motor has to come apart to get to the gear? OMG, I thought this was going to be reasonably easy...but is it really worth the work (I know, I know, YES IT IS) Any help from you guys here? I don't even want to think about taking it somewhere to have it done!

 

All I know is you don't have to take apart the frt of the motor. You can get to the bolt from were the oil fill tube enters the engine. Before you try this get a good manual for the instructions on how to do this.

 

the oil fill tube will spin off.

 

Try this link : http://dodgeram.info/tsb/recalls/605.htm

 

Thaks guys, got it figured out! Hope to have it back runnig by the end of the weekend!