3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

Help with battery drainage

Thread Tools
 
Search this Thread
 
Old 05-30-2010, 09:12 PM
  #1  
Registered User
Thread Starter
 
extremeshot's Avatar
 
Join Date: Oct 2005
Location: Southern, California
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Unhappy Help with battery drainage

Can anyone help me figure out why my batteries go down 2 to 4 volts in about 5 to 7 days. My truck is stock no mods except for a compressor for my air bags. It an 2006. Im not that good with electrical problems they suck. Any help Thanks
Old 05-30-2010, 09:22 PM
  #2  
Registered User
 
Tacomaman87's Avatar
 
Join Date: Jul 2007
Location: Maine
Posts: 254
Likes: 0
Received 0 Likes on 0 Posts
kind of hard to diagnose a draw on the over the internet i would try pul;ing the fuse for the airbags and see if that helps at all
Old 05-30-2010, 11:09 PM
  #3  
Registered User
 
RDM16CTD's Avatar
 
Join Date: Sep 2005
Posts: 150
Likes: 0
Received 0 Likes on 0 Posts
Maybe the batteries are the problem - check and make sure the terminals are clean and have a good connection. If that checks out ok then get the batteries and charging system checked out to make sure all is good - most auto parts stores (Checker Auto, Auto Zone, etc) will test them for you for free.

A next step would be to hook up an amp meter and confirm that there really is something drawing current when everything is supposed to be off. It's not a hard test but if you're not comfortable doing the electrical work maybe find a friend with more experience in this area. Once the amp meter is installed you can remove fuses and circuit breakers, each in turn, and find which circuit is causing the problem (the current draw will stop when you pull the fuse on the problem circuit). But I wouldn't disturb everything before checking out the basics first - battery terminals, condition, and charging circuits. Let us know what you find out
Old 05-31-2010, 10:01 AM
  #4  
Registered User
Thread Starter
 
extremeshot's Avatar
 
Join Date: Oct 2005
Location: Southern, California
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Thanks RDM16CTD, I will do that. Thanks again for your input, Just one more question, where do you install the amp meter? Thanks
Old 05-31-2010, 11:44 AM
  #5  
Registered User
 
jkitterman's Avatar
 
Join Date: Jul 2004
Posts: 645
Likes: 0
Received 0 Likes on 0 Posts
You are better taking your truck to someone. Test meters are not cheap and I would hate to see you fry your ecm or something else expensive just trying to save a buck. Take your batteries out, have them charged and load tested. If it is more than that, take it in.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Chrisreyn
Other
22
05-14-2013 09:15 PM
77machomopar
24 Valve Engine and Drivetrain
9
08-14-2009 06:15 PM
redpoint5
Other
9
05-16-2007 07:52 AM
planejane
1st Gen. Ram - All Topics
7
08-23-2004 03:17 PM
doodah
12 Valve Engine and Drivetrain
3
02-12-2003 07:57 PM



Quick Reply: Help with battery drainage



All times are GMT -5. The time now is 09:53 AM.