jmccart

I was looking around e-bay to check prices. One guy lists a 247-4202 part number for 98.5 to 2002 Cummins' for $425. Another guys lists studs for a 98.5-2007 at like $525. So my quesiton is, are the $425 studs what one would want for an 06?

Here they are:

http://cgi.ebay.com/ebaymotors/ARP-H...spagenameZWD1V

and

http://cgi.ebay.com/ebaymotors/Dodge...spagenameZWD1V


Thanx.

PourinDiesel

Get the cheaper set.
Same difference...problem is one seller doesnt know or care that the new engines use the same studs.

jmccart

U R right pourinDiesel


http://www.arp-bolts.com/Catalog/Catalog.html

CTD03

you dont need head studs on the CR unless you are going over 45pound of boost

they have the double head gasket very well designed
so save you self the money and put it to better

OT-OF-Here

Ok,... I have them (arps) and obviously thought I needed them to spend that kind of money for them.,..... But then I talked to RC *** and he's making 1200hp (or thereabouts) with STOCK ones and stock head gasket.

Obviously all of us who have spent the $$$ felt we needed them. Not so sure anymore.

trik396

UH-oh... here we go... RC is running stock bolts? Ask him if he dropped his compression a ton.... please..?