Hard start in morning
#1
Registered User
Thread Starter
Join Date: Jan 2007
Location: kentucky
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Hard start in morning
I have a 99 2500 24 valve, 5spd, longbed, 100K, when i go and start the truck in the morning, the engine turns over for 15 seconds before stating. Pluging it in does not help. The truck starts fine when it is warm. I seems to have problems when it has sat for longer than 4 hours or more. Sometimes (1 out of 5 times) it will start right up when is cold. I just bougth this truck, the old owner had a new injector pump put in it. I held a test light to the intake heater an it was fine. ANY IDEAS? Could the injection pump not be timed right? If anyone has any idas i would really be greatful. thank you
#3
Registered User
Thread Starter
Join Date: Jan 2007
Location: kentucky
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Not sure on the pressure. Someone else said the same thing. That will be the first thing i will check. The filter is new i think it was put in with the injector pump. Thanks for the info.
#6
Registered User
Thread Starter
Join Date: Jan 2007
Location: kentucky
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Hay, when i turn the key i can hear the lift-pump come on, I agree with maybe it is losing pressure after is sits. thanks for the info, i plan to put a fuel pressure gauge in and see it that is the problem. I will let you al know when i figure it out. thanks
Trending Topics
#8
Registered User
Thread Starter
Join Date: Jan 2007
Location: kentucky
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
I have been reading all the old "fuel pressue gauges" stories, an i cant find a common brand that works well for a 1999 24v, I want to order one asap. I am also looking to redo my transfer pump system, any good after market pumps, thanks for all the help !!
Thread
Thread Starter
Forum
Replies
Last Post