06CTDforAU

Does the gauge/gauges get in your way when trying to look at the speedometer and rpm gauges? I can't really tell from what pictures I have seen. Thanks!

omaharam

I always wondered the same thing. I got to drive one a couple months ago and it's not bad at all.

bluechrome

I have mine on the left, which is the tach. I only look at my tach when i'm pullin so, no it does not get in the way

Cummins610

No-but to look at the odometer or gear indicator you need to move you head a little,I got the dual pod and it don't bother me

Rpainter

no not really I have the dual pod and you cant see the miles or what gear you are in but I can still see the speedo and tach

Luvnacumns

Nope it doesn't block anything!!

bluechrome

No gear indicator for me. and don't really care bout the miles. I only look at that every 5000 or so

06CTDforAU

Thanks for all the replies guys. I've got a Isspro EGT gauge in an SRT-10 pillar and I'm trying to decided if I want the boost and the fuel pressure or just the boost. Hmmmm...... decisions, decisions.

rufushusky

Same here!

RamWheelsBy4

As stated above the OD readout and gear selector is somewhat blocked when sitting in normal driving position. But that is all. This is picture from about my normal driving perspective.

06CTDforAU

That's the kind of pic I've been looking for. Every one I have found so far is from a different perspective. Thanks for the pic! That's what I was looking for.

06CTDforAU

One other question.... how is the tubing/harnesses routed to the gauges? Is there a cutout of something in the back of the mount?

RamWheelsBy4

There was not really a cutout or grooved slot on mine. My wiring just runs out the back and under the dash cluster. The back of the pod goes all the way to the dash. I used a couple of small velcro tabs on each side to secure.

06CTDforAU

Thanks. I wonder if I would have any problems running tubing/wiring for a boost gauge and a mechanical fuel pressure gauge?

RamWheelsBy4

It could be a little awkward, but I don't think my boost line would be any trouble. The way mine is mounted with the wiring and velcrow it is probably 3/16 of any inch above the steering column where the wiring runs out the back. But it does not show.