GSK tention
#1
Registered User
Thread Starter
Join Date: Feb 2008
Location: live oak, ca
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
GSK tention
i had the 3gsk and last weekend i upgraded to the 4... pulls a lot harder and is a lot more fun to drive, but falls on its face at 3500, it will pull all the way there then just hits a wall even when free reved. should i try to tighten the springs one more click? my fuel pressure is ok and i also changed out my dv's but not 100% sure exactly what they are, they came out of a john deere they say 105 on them but im sure they are as big or bigger than a 191. the ring at the top is smaller than the 181's, and the slots travle higher up the valve than the 181 and they are the same diameter, but anyway should i try to play with the spring tention or do i need more fuel to get the revs?
Thread
Thread Starter
Forum
Replies
Last Post
SHARPMACHINE
Performance and Accessories 2nd gen only
7
03-06-2007 08:45 AM
MR HYDROSEED
Performance and Accessories 2nd gen only
6
03-09-2005 10:49 PM
Got Smoke?
Performance and Accessories 2nd gen only
7
10-26-2004 03:57 PM