gov. springs
#1
Registered User
Thread Starter
Join Date: Mar 2006
Location: CT
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
gov. springs
hey, will a 3 or 4gsk gov. spring give me more low and top end power thoughout all rpms? I am only makin 1000 degrees for temp too with a #0 plate. what else could give me more performance for cheap besides doin a turbo , injectors, or delivery valves?
#2
Registered User
Join Date: Mar 2004
Location: springfield,oh
Posts: 801
Likes: 0
Received 0 Likes
on
0 Posts
a gsk won't add any power, but it sure does feel like it. it allows you to run higher rpms and fuel all the way through. i'm amazed your 0 plate has not trashed your tranny, you better save your money for a tranny because your gonna need it
#3
Registered User
Thread Starter
Join Date: Mar 2006
Location: CT
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
its still not that fast, anyways my tranny was rebuild right before i got it, so i dont know it it was build good or not, cause off the line to the boards, i have no slippin anywhere, well i need a lot more RPMs too, right now i dont have very many
#6
Registered User
Originally Posted by halerazor
a gsk won't add any power, but it sure does feel like it. it allows you to run higher rpms and fuel all the way through. i'm amazed your 0 plate has not trashed your tranny, you better save your money for a tranny because your gonna need it
and while ur at it, go with the 4K kit, it seems to be the better option, and once its in there, u dont have to take it apart again and mess with the pump anymore. I have it. I too second the motion on the zero plate, your tranny must have nine lives, especially if you beat on it....
Rick
#7
Registered User
Join Date: Mar 2006
Location: New Albany,Mississippi , HOTTY TODDY !
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Hey - do a search on here for "free GSK" its a string from Gunracer. He tells how to put washers in above the governor springs and get over 3000 rpm.
Trending Topics
#9
Registered User
Join Date: Mar 2006
Location: New Albany,Mississippi , HOTTY TODDY !
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm ATS has a new ATS spring kit.....
http://www.atsdiesel.com/ATSWebsite/...Mechanical.asp
Also Piers or Haisley or some of the other sites would be good to check
http://www.atsdiesel.com/ATSWebsite/...Mechanical.asp
Also Piers or Haisley or some of the other sites would be good to check
#11
Registered User
Thread Starter
Join Date: Mar 2006
Location: CT
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
#13
Registered User
Join Date: Mar 2004
Location: Austin, TX, Toronto, ON
Posts: 1,488
Likes: 0
Received 0 Likes
on
0 Posts
u have a 100plate...look at the profile of that plate...thats the fueling u will get over 2700rpms...now add whatever gsks and that profile will just stretch over the wider new rpms...so technically ur biggest fuel surges will come on a couple 100 rpms later with a 3k gsk and another couple 100rpms later with the 4k.
if u had a 0 plate nothing should technically change
if u had a 0 plate nothing should technically change
Thread
Thread Starter
Forum
Replies
Last Post
fishin fever
1st Gen. Ram - All Topics
11
03-13-2006 06:46 PM
Diesel-Dan
12 Valve Engine and Drivetrain
23
08-29-2004 07:19 AM