gound wire
#1
Registered User
Thread Starter
Join Date: Feb 2004
Location: GO NAVY!!!!!
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
gound wire
what wire on the steering colum is the ground wire i need it to ground my pyro gauge box. or is there a grounding screw under the kick panel i am missing
thanks
marty
thanks
marty
#3
Registered User
The three screws that hold the knee bolster can be used for grounds. They screw right into the metal frame that supports the dash. I've got most of my underdash gauges and switches tied to this and haven't had any problems.
#5
Registered User
Join Date: Jan 2003
Location: Sugarland,College Station, Mason, TX
Posts: 1,113
Likes: 0
Received 0 Likes
on
0 Posts
Do u have an alarm on your truck? If sotake off the panel right below the steering wheeland you will see a black screw with one or two black wires on it remove that screw and put the ground clip on there and screw itback in. When the screw is removed your siren will go off really quietly dont worry bout it. Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
garretch
Performance and Accessories 2nd gen only
14
11-30-2006 10:04 PM
TPilaske
Performance and Accessories 2nd gen only
16
11-22-2002 08:15 PM