How to get horn chirp?
#1
Registered User
Thread Starter
Join Date: Sep 2006
Location: Ferdinand, ID
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
How to get horn chirp?
I have the Keyless entry and was wondering if i can make the horn "chirp" when I lock the doors? How do I get it to do that?
Thanks
Thanks
#3
Registered User
Join Date: May 2006
Location: Imperial, CA
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
On my 2002 it says how to do it in the owners manuel, not sure if 98 is different
1.Place the key in the ignition and turn the key to the ON position(do not start the engine)
2.Press and hold the unlock button on the transmitter for four to ten seconds.
3.While the unlock button is pressed, press the lock button on the trasmitter and then release both buttons.
4.You will hear a single chime when the programming is completed.
Hope this helps.
1.Place the key in the ignition and turn the key to the ON position(do not start the engine)
2.Press and hold the unlock button on the transmitter for four to ten seconds.
3.While the unlock button is pressed, press the lock button on the trasmitter and then release both buttons.
4.You will hear a single chime when the programming is completed.
Hope this helps.
#6
Administrator / Scooter Bum
I used those procedures to cancel the horn chirp on mine.
After I installed the air horns, I figured the neighbors wouldn't like to hear them blow everytime I locked or unlocked the truck.
After I installed the air horns, I figured the neighbors wouldn't like to hear them blow everytime I locked or unlocked the truck.
Trending Topics
#9
Registered User
Join Date: May 2006
Location: Imperial, CA
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
#10
Registered User
Thread Starter
Join Date: Sep 2006
Location: Ferdinand, ID
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
On my 2002 it says how to do it in the owners manuel, not sure if 98 is different
1.Place the key in the ignition and turn the key to the ON position(do not start the engine)
2.Press and hold the unlock button on the transmitter for four to ten seconds.
3.While the unlock button is pressed, press the lock button on the trasmitter and then release both buttons.
4.You will hear a single chime when the programming is completed.
Hope this helps.
1.Place the key in the ignition and turn the key to the ON position(do not start the engine)
2.Press and hold the unlock button on the transmitter for four to ten seconds.
3.While the unlock button is pressed, press the lock button on the trasmitter and then release both buttons.
4.You will hear a single chime when the programming is completed.
Hope this helps.
#11
Registered User
Join Date: Mar 2006
Location: Acushnet, MA
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
This is what works for my 01' :
Automatic Door Locks at 15mph (on/off)
1. close all doors
2. place key in ignition and cycle from off to on postition 4 times leaving it in the ON postition (do not start)
3. Press the drivers side door lock to LOCK to lock the doors within 30 seconds.
4.You'll hear a single confirmation chime when programming is complete.
5. repeat to toggle this feature.
Remote Keyless unlock all doors on first press:
1. Same as 1 & 2 above.
2. Press drivers door lock switch to UNLOCK the doors then to LOCK within 30 seconds.
3. You'll hear a single confirmation chime when programming is completed.
Horn Chirp ON/OFF:
1. Same as 1 & 2 above.
2. Press and hold the UNLOCK button on the REMOTE for 4-10 seconds.
3. Press the LCK button on the REMOTE and then release BOTH button.
4. You'll hear a single confirmation chime whe programming is complete.
Automatic Door Locks at 15mph (on/off)
1. close all doors
2. place key in ignition and cycle from off to on postition 4 times leaving it in the ON postition (do not start)
3. Press the drivers side door lock to LOCK to lock the doors within 30 seconds.
4.You'll hear a single confirmation chime when programming is complete.
5. repeat to toggle this feature.
Remote Keyless unlock all doors on first press:
1. Same as 1 & 2 above.
2. Press drivers door lock switch to UNLOCK the doors then to LOCK within 30 seconds.
3. You'll hear a single confirmation chime when programming is completed.
Horn Chirp ON/OFF:
1. Same as 1 & 2 above.
2. Press and hold the UNLOCK button on the REMOTE for 4-10 seconds.
3. Press the LCK button on the REMOTE and then release BOTH button.
4. You'll hear a single confirmation chime whe programming is complete.
#13
Registered User
Join Date: Jun 2004
Location: SunnyVale Trailer Park
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
#14
Administrator / Scooter Bum
I use mine to lock the doors.
But I'm within a couple of feet of the truck when I do.
I can hear the doors lock.
I prefer not to let everyone in the parking lot know that I'm walking away from my vehicle.
But I'm within a couple of feet of the truck when I do.
I can hear the doors lock.
I prefer not to let everyone in the parking lot know that I'm walking away from my vehicle.
#15
Registered User
Join Date: Nov 2004
Location: Cypress. Texas 77433
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
On our '0s when the truck is locked, a little red led flashes on the rear view miror for 10 seconds. Also is set to beep if the remote is used. Alarm still sets if locked manualy