Where to get a gasket
09-19-2005, 06:42 PM
#1
Registered User
Thread Starter
Join Date: Oct 2002
Location: Pottsville, PA
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Where to get a gasket
When I first got my truck & installed gauges I did everything safe (paranoid 
) lol and seperated the turbo from the manifold to tap the manifold. Well I took off the Turbo Oil Drain Line and when I was finished put everything back together... Every now and then I check under the hood just to make sure everything looks good & There is some oil seepage running down that tube. Both bolts are tight so I'm figuring I disturbed the gasket & now I would like to put a new one on...
Does anyone know the part number & where I can obtain one?
) lol and seperated the turbo from the manifold to tap the manifold. Well I took off the Turbo Oil Drain Line and when I was finished put everything back together... Every now and then I check under the hood just to make sure everything looks good & There is some oil seepage running down that tube. Both bolts are tight so I'm figuring I disturbed the gasket & now I would like to put a new one on... Does anyone know the part number & where I can obtain one?
09-19-2005, 10:23 PM
#2
Registered User
Join Date: Jun 2004
Location: NW IL
Posts: 850
Likes: 0
Received 0 Likes
on
0 Posts
If I could find the reciept, I'd give you a P/N. 
Call a Cummins shop or distributor, or a turbo shop.
http://www.cummins.com/na/pages/en/d...r.cfm?state=pa
Some of the vendors here, may have them as well.
Call a Cummins shop or distributor, or a turbo shop.
http://www.cummins.com/na/pages/en/d...r.cfm?state=pa
Some of the vendors here, may have them as well.
Thread
Thread Starter
Forum
Replies
Last Post
ted_pulliam
24 Valve Engine and Drivetrain
8
07-16-2009 11:33 AM
jmccart
3rd Gen High Performance and Accessories (5.9L Only)
14
07-31-2008 11:46 PM
wildchild97
Performance and Accessories 2nd gen only
7
09-25-2007 02:44 PM