Gears
#2
Registered User
Join Date: Aug 2005
Location: Edmonton, Alberta
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Good question, is there a way to tell from the VIN code, I know mine is stock, and I spin around 2100 RPM at 60 MPH with the 6 speed, so I think I got 4.10's
#3
Registered User
Join Date: Aug 2002
Location: Kerrville eastern new mexico, west texas
Posts: 3,308
Likes: 0
Received 1 Like
on
1 Post
You should find a factory sheet on the hood and it will tell you. If its gone then when you run 70 the rpm's should be around 2 if it has a 3:54's any higher rpm and it should be 4:10's
#6
Registered User
Join Date: May 2005
Location: Missoula, Montana
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tayloe08
Does anyone know what gears would be in my truck? How does that relate to towing and MPG...good or bad?
Randy
P.S. Some upgrades to your tranmission will do a lot for your milage and pulling ability.
Trending Topics
#8
Chapter President
Those are 4.10's if you are revving that high at 70 mph with an auto..either way, your build sheet will tell you.......that should be on the under side of the hood near the latch and it will state the ratio.....I'm not certain, but I thought it was 00 and later that had the build sticker on the inside of the glove box door?
#9
Registered User
Thread Starter
Join Date: Jul 2005
Location: Alabama
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Just checked under hood and in glove box but no sticker! I know the truck has been repainted (at least the doors, fenders and hood) so that is probaly the reason for no stickers. I was thinking I would be able to use the VIN and the dealer. Would this work. Not an important factor right now I am just curious.
#10
Chapter President
Yes, the last few numbers in the VIN are only any good to the dealer.....these are the #'s that contain the info that will allow them to reproduce the original build sheet.
Thread
Thread Starter
Forum
Replies
Last Post
BigJohnston
3rd Gen High Performance and Accessories (5.9L Only)
20
07-14-2019 10:58 AM