GDP Intake Horn Tested!
#1
GDP Intake Horn Tested!
OK folks, finally got a GDP test completed. JP volunteered his truck and the results were pretty solid. The full article is available on our site (FINALLY back up) at : http://trivalleyperformance.com/inde...d=19&Itemid=51
The short of it is that it makes almost as much as the CFM+, is not plastic, has brackets for the GDP filter kits or for custom nitrous solenoid brackets, etc, and comes in cool colors. All for less than the other intake horns on the market.
The short of it is that it makes almost as much as the CFM+, is not plastic, has brackets for the GDP filter kits or for custom nitrous solenoid brackets, etc, and comes in cool colors. All for less than the other intake horns on the market.
#5
My pleasure! I think the folks from BD are sending one down for me to test on my truck, so we should soon be able to add that one to the pile.
Please feel free to suggest other products to test, we'll keep doing them as we have time!
Please feel free to suggest other products to test, we'll keep doing them as we have time!
Trending Topics
#9
Registered User
Join Date: Feb 2004
Location: Southeast WI
Posts: 530
Likes: 0
Received 0 Likes
on
0 Posts
Am I reading that graph correctly? The green lines are the new hp and torque with the GDP intake? The intake smoothed out those huge dips in hp and torque?
Andy
Andy
#13
Registered User
Join Date: Feb 2004
Location: Southeast WI
Posts: 530
Likes: 0
Received 0 Likes
on
0 Posts
#14
Easy, the dip was pretty much over by 2000rpm, you can draw a line to approximate the power curve without the dip. Even discounting the dip, the power gains elsewhere were consistent. Boost when the run started was the same for both runs and they finished approximately the same also (44ish psi)