turbo59pwr

Iwas wondering what all of you guys are using for mounts on the 03? Also do you know where a guy can get some used gauges at? I'd like to put some in my 03. Thanks.

turbo59pwr

sorry for the double post [undecided]

Mexstan

Used gauges are probably scarcer than hen's teeth. Good luck in your search. Have you looked on e-bay?<br>As for mounts, there is not a lot out there for the '03's yet. Due to this I am presently making my own dash pod. Should have it finished by the end of September and will post some pics.

turbo59pwr

Keep me in touch Mexstan I'd like to see how that turns out.

erslll

I just installed the Di Pricol gauges in a Pro Pod in my 03. I am pretty happy with the results. The gauges match the factory ones, including the lighting. Although, the EGT gauge's lighting is a little bright compared to the rest of the gauges. Check the link in my sig for pics.<br><br>I got the set up from Dave at Diesel Power Products. $290 for boost and EGT gauges, all the wiring and senders, and the Pro Pod painted to match the factory color.

Goodys1ton

I mounted my gauges using a 02 dash pod. I just took the Dremel to the bottom plate to take off some edges and it looks fine. The guages I used look good during the day, but the lights illumination on the new gauges are more of a blue then the dash gauges, just a small difference. Over all I am very happy with the install.

tobyw

I mounted mine in the 98-02 dash pod as well; just couldn't get rid of the A-pillar handle... Check my webpage for the pictures.<br><br>http://www.geocities.com/tobyw2000/Ramgauges.html

1Thom

I had a pillar mount on my 01 dodge, didn't have the 02 long enough to get them put on it. For the 03 I really didn't want to chop the handel , went to my local installer to check out an install he was doing on an 03 2500 and it made a convert out of me. had him install a BD Zbox electronic the next day on mine. ya gotta love it, out of the way , easy to read, fast reacting, and other good stuff<br>

SuperGewl

Call this company &quot;Outlaw Diesel Performance Inc.&quot; (503) 638-0532 Or e-mail them @ outlawdiesel@hotmail.com The contact person is Trevor Bott. They do a great job on all sorts of installs including gauges, injectors, aux tanks, exhaust systems &amp; more.<br>

WJB

[quote author=1Thom link=board=17;threadid=17585;start=0#msg164870 date=1059411060]
I had a pillar mount on my 01 dodge, didn't have the 02 long enough to get them put on it. For the 03 I really didn't want to chop the handel , went to my local installer to check out an install he was doing on an 03 2500 and it made a convert out of me. had him install a BD Zbox electronic the next day on mine. ya gotta love it, out of the way , easy to read, fast reacting, and other good stuff

[/quote]

Do they have a website? Do you have pictures? I don't want to hack off my handle either. Thanks, Wade

1Thom

WJB, Not sure if they have a website (probably do) but here is the web addresses to my gauge pics.
www.jggrafx.com/thomsstuff/gauge1.jpg
www.jggrafx.com/thomsstuff/gauge2.jpg
www.jggrafx.com/thomsstuff/gauge3.jpg
www.jggrafx.com/thomsstuff/gauge4.jpg
www.jggrafx.com/thomsstuff/gauge5.jpg

WJB

Thanks 1Thom for the pictures. That looks great! Wade

Push Rod

I actually brought something in a couple days back that may be of interest to 03 owners. Its the ProPods &quot;Wedgee&quot; dash mount unit, and it doesn't look too bad at all. I took some pictures scrunched down in my seat (the customer that was inquiring is 5'5&quot and it doesn't block view, and is readily visible. I think I'll be moving away from my IssPro gauge cups, and using the Wedgee.

The pics:

turbo59pwr

1THOM where did you get that unit from? that thing is cool ;D
bet it was pretty pricey.

Shovelhead

Rod sells the &quot;Wedgee&quot; at www.wildcatdiesel.com.