mojave_ron

new to the board im planning on purchasing a fass system and looking for a inline push lock fuel pressure adapter to install close to injection pump but not sure what will work with the fuel line that comes with the fass;any help would sure be appreciated

HOHN

I'm not sure of the diameter hose that the FASS uses, but getting a FP guage in shouldn't be too hard.

Have you considered Scotty's Smart Fuel system? I think it would work with your FASS 2 pump-- it may require some adaptation. Scotty's setup is just 1/2" hose, so adapting is easy.

The heart of his system is the fittings-- THOSE are the biggest restriction in the stock setup, and these are the highlights of the new system. They fix the biggest problem with the stock setup.
www.scottyairsystems.com

jlh

mojave_ron

I have considered going that route but decided to go with that Fass System with filters. I was going to hook up fuel line directly to injector pump. That would elimante the stock fuel filter. I want to tap into the fuel line 6 to 8 inches before the injection pump. I found 6 an fittings but I am not sure they will work with the fuel line supplied with the Fass System.

farmer dave

The fuel line is 3/8". I was also having problems hooking up the fuel pressure line after the install of the FASS. I ordered a kit from the person that I got the gauges from. I is just a T the is spliced into the line with an adaptor on it.