Fuel Press. Gauge
08-18-2008, 03:59 AM
#1
Registered User
Thread Starter
Join Date: Jul 2008
Location: Lakewood, Ca.
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
Fuel Press. Gauge
Where should the fitting be installed for mech. fuel press. gauge coming from the tank?? (close to the cp3??) What should the press. start out at?? Same for rail press for starting out?? I'm trying to get better equipped and more knowledge.
08-18-2008, 07:19 AM
#2
Registered User
Join Date: Aug 2007
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
I tapped into my big line just before the CP3.( push lock Tee fitting from Vulcan performance). Its after filter so hopefully the gauge will let me know when the filter needs changing. At idle I see 19psi and WOT drops down to 13or14psi. Not sure on RP yet... Alot of guys seem to be having trouble with their qzilla RPgauge, so I'm going to save a few more clams and get the DiCipricol.
08-18-2008, 10:05 AM
#3
Registered User
Join Date: Sep 2005
Location: Simi Valley, Calif.
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
FWIW, when I had mine installed, its using a banjo bolt in the filter housing with a hose to the isolator.
Being stock engine, it shows 9 at idle and at WOT it drops to 6.
Being stock engine, it shows 9 at idle and at WOT it drops to 6.
Thread
Thread Starter
Forum
Replies
Last Post
j
3rd Gen High Performance and Accessories (5.9L Only)
8
05-16-2007 08:11 PM