beardedone

I have just installed my aluminum cross the box tank. I am going to plumb it into the vent line of the stock tank but I would like to put an in line filter on it. What kind of suggestins do you have that have worked without breaking the piggy bank. Where can I order them. This is a gravity feed system. Thanks

rich

i use the cheap inline filter that you can get for 5 bucks it will keep a lot of the crud out

AH64ID

Something like the WIX 33123 would be a good filter for this app. You can use WIX base # 24309 with it... It should do a decent job of gravity feed if you can plumb it well.. .but you would be best off with a small transfer pump.

If you don't want to deal with a large filter than something like FF5079 (fleetguard) or WIX 33270.

haulin-rv

fleetfilter.com has filter heads at a great price. Then you can use a spin on. I run 2, first a 10 micron fuel water sep filter then a 5 micron filter.

dezeldog

I to have a gravity feed tank and use a racor 2 mic w/s. I believe it is a R13s.

Jim

johnh

that's what i use, my final filter is a racor 2 micron water sep/filter on the frame before the lift pump

carl48

i used a 86377 car quest filter it is 2 micron i gravity feed through it to the main tank. i used this filter because i stock it for my larger trucks