Front end swap
11-10-2008, 06:53 PM
#1
Front end swap
I have to replace my front end with a 4:10 gear to match the rear. I am curious if there would be any advantage to going to a 2001 or 2002 frontend?
Is there anything differetn about the linkage,tie rods,etc? I have to replace all of the steering linkage. It is all loose and worn out. I usually use Moog products. Is that OK, or is there better linkage components to replace with? Are the braking components better on the 01 or 02 than on the 99-00 frontend ? Thanks
Is there anything differetn about the linkage,tie rods,etc? I have to replace all of the steering linkage. It is all loose and worn out. I usually use Moog products. Is that OK, or is there better linkage components to replace with? Are the braking components better on the 01 or 02 than on the 99-00 frontend ? Thanks
Thread
Thread Starter
Forum
Replies
Last Post
O5DodgeRam5.9
3rd Generation Ram - Non Drivetrain - All Years
25
01-04-2020 09:51 PM
Gordonville
3rd Gen High Performance and Accessories (5.9L Only)
4
04-18-2005 09:45 AM
