coreydr2003

I'd like some info on there stage2 and 3 Cp3 if anyone can help

Megaramasaur

I've got one, what would you like to know?

coreydr2003

Well iv hard a few things about them but my biggies question is on the stage three can you feel the power differance. I have a buddy that bought one from industrial. I'v hard there kinda behind ao there pump and floor it was the way to go. I like to know the differance in dyno to tell the real truth. Thanks for your time I'd go for any info

Rpainter

Last i heard john is swamped with cp3's I would try to find out what the wait is He is so busy he is not answering his business phone

omaharam

It all depends on how short on fuel you might be. Adding duel pumps vs a stage 1 pump on a stock truck is probably going to yield the same results - it doesn't need the extra fuel. You need to try to get a hold of John at Floor It and talk about YOUR specific mods and he can tell you what stage you need to supply enough fuel.

coreydr2003

I'm sure i'm short on fuel. lots of mods just lacking the cp3. thanks

Sloverado

I have been running a Floor It pump for over a year now. His Stage 2 pumps (single pump) have a few trucks over the 700 hp on #2 only. His Stage 3 pump is not all the way done yet for sale to the public but it will be a very high flowing pump. I can talk numbers on flow but I am sure for an everyday truck the Stage 2 will work fine. The Stage 1 pump has trucks over 600 hp.

coreydr2003

well i talked to one of his close buddys he has got a stg3 proto he said they would be out soon.

Sloverado

I know I am one of his buddies. He is waiting on one part and they will be ready. His Stage 3 will out and out flow. And to be honest we were going to put the proto of it on my truck for the Platte City pull but I didn't want to do it 2 hours before I pulled as that is the day he did the testing on it.

coreydr2003

I take it you know the boys form st,joe diesel and Midwest. how was the pull up there i never got a chance to talk about it

jwb600

ive got a floor it stage 2 and it doesnt keep up with a smarty & tst stacked.

Sloverado

Yes I know them guys. Ryan and Landon at Midwest are great guys.

600 My truck didn't like that stack either. I lost power with that stack and a pressure box (tripple stack). It likes the the bete Smarty program and a custom pressure box I am running.

coreydr2003

Ya I deal with them alot where biulding a 06 maga cab dully right lots of mods strait # 2 no spray

coreydr2003

Well i have hard alot of things what about a dyno sheet Idustrial vs. Floor it

Sloverado

But it I would go with John's pump any day of the week. He knows what he is doing and is very good at it. Some times it takes a little longer but he does A+ work and you get your own pump back. That is service if you ask me.