finally tested it for leaks
#1
Registered User
Thread Starter
Join Date: Apr 2005
Location: eastern,nebraska
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
finally tested it for leaks
I love this truck never had any problems with it but I finally tested it for air leaks, I think it had about 5 of them I fixed 4 of them but one minor one is in a spot that I really don't know what to do with it I have taken a picture of it and tryed to highlight it. The picture should be in my gallery I think if I did that right If not tell me and I will try again. Thanks in advance for info on this.
#3
Chapter President
Leak tester
Tell me more about the leak tester you made up. it looks pretty coo.
Pull out the RTV and fix the hole with JB weld, it will be as good as new.
Pull out the RTV and fix the hole with JB weld, it will be as good as new.
#4
Registered User
Thread Starter
Join Date: Apr 2005
Location: eastern,nebraska
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Leak tester
The leak tester is just a peice of 4" pvc pipe with an end cap glued on it then I drilled and taped the end for a 1/4 npt male air coupler with an old air compresser pressure gauge screwed in on the other side. It just slides in and clamps down in the intake tube it will take about 20 psi before the intake tube wants to come off of the turbo but it will find leaks no problem. Good luck with it, the jb weld is a good idea I will try when I get some of it.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
KATOOM
24 Valve Engine and Drivetrain
4
04-28-2003 02:43 PM