Filler Neck anti siphon ball
#1
Registered User
Thread Starter
Filler Neck anti siphon ball
My filler neck rubbed on a piece of body work until it started leaking like a sieve when I filled it. I noticed there is an anti siphon ball in the neck. Would removing that device make filling go any faster?
#5
Registered User
Join Date: Feb 2006
Location: West Jordan, UT
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Mine never had one (C&C truck). There is about a 4 or 5 inch filler tube that sticks up just over the frame rail under the flatbed. A little bit of a reach for filler hose... However, it takes as big a nozzle as will fit - I can use the big high flow nozzles that semi's use - makes filling the tank a breeze.
Of course if I was to be turned belly up, the fuel could come out as fast as it went in...
Of course if I was to be turned belly up, the fuel could come out as fast as it went in...
#6
Administrator
Trending Topics
#8
Registered User
Join Date: Jun 2007
Location: Canton, GA
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
I'm not sure if that's right. I've used diesel to start bonfires a few times, and I've seen stupid drunk people pour diesel into fires and it seemed to burn just fine.
#9
You're both correct. Diesel is categorized "combustible," whereas gasoline for example, is "flammable." Big difference. By itself as in a puddle like Dan stated, it won't burn. But under extreme compression or on a surface or surfaces like a brushpile that allows fumes to concentrate and it becomes a great internal combustion fuel or fire accelerant.
#11
Stupid question: If the cap is on eht eneck, how is it going to run out as fast as it went in? I realize the cap is vented, but to go out at a fast rate? What am I missing here?
#13
When was the anti-siphon ball added? I have a mostly original '91 that I know did not have the filler neck fooled with (family "heirloom" truck) and it has no filler ball, and will take the high flow nozzles at the fuel station.
BTW, those high flow things are great. At the lowest setting I can fill my tank in under a minute.
BTW, those high flow things are great. At the lowest setting I can fill my tank in under a minute.
#15
Banned
Join Date: Jan 2004
Location: Cape Girardeau MO
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
If a person's truck does have one, where does one look to remove it and speed fuelling? I am getting tired of having to hold my tongue just right to fill the tank.
DP
DP